Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Vulcan-Hart Tamaño del archivo: 10.64 mb Nombre del archivo: Idioma del manual:

2. Remove the lower front panel as outlined in Covers, Panels and Handles. 3.Disconnect the pilot valve tubing from the pilot outage protection valve. 4.Remove the oven bottom assembly as outlined in Covers, Panels and Handles. 5. Loosen the b-nut and remove the ignitor wire from the bracket. – 20 – 6. Remove the two bolts from the pilot outage protection valve and the bracket. 7. Disconnect the pilot outage protection valve from the union and the thermostat. 8. Remove the pilot outage protection valve and the ignitor wire from the broiler. 9. Reverse the procedure to install. Thermostat (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the control panel cover as outlined in Covers, Panels and Handles. 2. Note the location and position of the temperature probe in the oven. 3. Disconnect the thermostat from the pilot outage protection valve and from the oven burner tubing. 4.Remove the temperature probe from the oven. 5.Remove the thermostat with the temperature probe from the broiler. 6.Reverse the procedure to install. – 21 – Oven Burner Nozzle (GHCB40) WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the oven burner cover as outlined in Covers, Panels and Handles. 2. Disconnect the oven burner tubing from the oven burner nozzle. 3. Remove the oven burner nozzle from the bracket. 4. Remove the oven burner nozzle from the broiler. 5. Reverse procedure to install. Burner Valve [(IR2(B) and HCB2(B)] WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the burner knob cover plate as outlined in Covers, Panels and Handles. 2.Disconnect the burner valve from the elbow and the burner tubing. 3.Reverse the procedure to install. – 22 – Burner Valve (GHIR44) WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE AN OPEN FLAME. 1. Remove the manifold cover assembly as outlined in Covers, Panels and Handles. 2.Disconnect the burner tubing from the burner valve. 3.Disconnect the burner valve from the sub- manifold. 4.Remove the burner valve from the broiler. 5.Reverse the procedure to install. Regulator (GHIR44) WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES. WARNING: SHUT OFF THE GAS BEFORE SERVICING. WARNING: ALL GAS JOINTS DISTURBED DURING SERVICING MUST BE CHECKED FOR LEAKS. CHECK WITH SOAP AND WATER SOLUTION (BUBBLES). DO NOT USE ...

Descargar ahora

Introduzca dos números de la imagen: