Votos - , Puntuación media: ( )

Manual de usuario Haier, modelo QBJ1-130A58E

Fabricar: Haier
Tamaño del archivo: 524.12 kb
Nombre del archivo: bd55ec25-8251-481b-90c7-524e3bf0bc15.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

Insulation: Polyurethane foam, thickness-45 mm, good heat preservation effect. 3. Outer shell: Aluminium / zinc coated steel sheet. 4. Frame: Steady structure, shapely and durable . SUS 304 stainless steel, food grade. Features Technical parameter Appearance and parts Models Specification of tubes Collector frame angle standard fixed Number of tubes Aperture area Usable water 58mm 1800mm all glass evacuated tubular collector 45 Remarks:1. The warp of a parameters is 3%. the warp of usable water parameters is 5%. The permitted error limit of other parameters is 10% perture area QBJ1-130A58E QBJ1-150A58E QBJ1-175A58E QBJ1-200A58E 14 16 19 22 1.79m2 2.07m2 2.48m2 2.90m2 130L 150L 175L 200L Electric auxiliary heating Rated power: 1500W Water level sensor Using the water level sensor with the height of 360 mm Outer shell Evacuated tubes Base support Cover Silicon seal ring Frame Foot cushion QBJ1-230A58E QBJ1-270A58E 25 30 3.35m2 4.03m2 230L 270L Total water volume 169L 195L 228L 262L 300L 354L Precautions Precautions Precautions 1.When using the water heater with electric heating, ensure that electric heating and electric tracing belt are closed. 2. Avoiding irradiation without water after installation, it can't be used immediately, it should be sheltered. 3. When supplying water at the first time, it should be operated in the morning or evening or the condition of short of light; avoid supplying water in strong sunshine, in order to prevent vacuum tubes bombing. 4. If the water pressure isn't enough for water supply, please install an pressurize equipment. 5. When the hot water is to be used, don't place the spray head face yourself until the water temperature is suitable. 6. This product can supply the water depend on the fall of the tank and the water exit , an pressurize equipment is recommended while the water couldn't be supplied normally due to the low fall. 7. Do not supply cold water more than once in a low solar irradiance day. 8. The energy is from solar, in the days that lack of solar such as rainy or snowy day, the temperature of the water may can't reach your demand, If there isn't electric heating , it may not be used normally. 9. Make sure the evacuated tubes clean, hose off the dust and dirt on the tubes and the reflector before the winter comes. 10. The evacuated tubes resist as low temperature as -70 when tubes is emptied. The tank should remain filled up during continuously cloudy or snowing days in winter, in addition every two days the cold water in the tank should be changed to prevent the water in the tank from freezing which might damage the tubes. 2 Before use Before use Notice Please take time to read this manual and familiarize yourself with the function of this production. 1. Please check out the packing list. 2.If you fix electric auxiliary heating and controller, please select Haier equipped products. 3. To avoid the scald, please mix the hot and the cold water before use it. 4. In order to protect the tank ,please don'...