Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
These air purifiers use Model 30907 replacement pre-filters. WWW.HUNTERFAN.COM QuietFlo™ 115 (Model 30115) TM QuietFlo 0 1 2 3 ® SINCE 1886 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFIER AND SAVE THESE IMPORTANT INSTRUCTIONS 1. This Air Purifier is designed for use on a flat, level surface and may not work properly on an uneven surface. ALWAYS place this Air Purifier on a firm, level surface. ALWAYS place the Air Purifier at least six (6) inches away from walls and heat sources such as stoves, radiators, or heaters. 2. Place the Air Purifier in an area that is out of the reach of children. 3. Before using the Air Purifier, extend the cord and inspect for any signs of damage. DO NOT use the product if the cord has been damaged. 4. This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature. 5. ALWAYS UNPLUG the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned. 6. DO NOT tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving. 7. DO NOT immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the CLEANING AND FILTER REPLACEMENT instructions. Introduction Thank you for purchasing the QuietFlo™ True HEPA Air Purifier from Hunter Fan Company. You have purchased our latest development in portable Air Purification Systems. This system has been developed to improve the quality of the air you breathe. Our QuietFlo™ True HEPA Air Purifier out performs other air purification systems by quickly and effectively removing dust, smoke, and pollen particles. Room air is pulled in through the front grille and cleaned across the HEPA filter. Clean air is then released out the top grille. The HEPA filter will remove 99.97% of particles 0.3 microns in size from air that passes through the filter. The activated carbon pre-filter helps remove cooking, smoke, and pet odors from the air. It also traps lint, hair, and large particles, which helps improve the life and performance of the HEPA filter. FORM 41477-01 Rev 1-29-2001 2 © 2001 HUNTER FAN CO. FORM 41477-01 Rev 1-29-2001 3 © 2001 HUNTER FAN CO. Setting Up Your Air Purifier 1. Remove your air purifier from the box and take it out of the clear plastic protective bag. 2. Place your QuietFlo™ Air Purifier on a firm, flat surface. 3. Before turning the Air Purifier ‘on’, you need to open the front grille. To release the front grille, press the tabs until the front grill slides easily over the tabs. Refer to Figure 1. 4. The HEPA filter is already installed in the correct position, but you need to confirm that it is fully inserted. To remove, grasp the edge of the filter frame and pull it forward. Notice the orientation of the flaps and seal, which should be pressed firmly into the filter opening. 5. The carbon pre-filter is mounted inside the front grille with "hook" tape. Confirm that it covers the grille vents. Refer to Figure 2. 6. Place the filter installation reminder sticker on the inside edge of the front grille. Circle the month and write the year of installation for the pre-filter and HEPA filter. 7. Replace the filter and front grille. Be sure that the bottom grille tabs are in position first, and then push the top of the grille forward until it is closed. The unit is now ready for normal operation. NOTE: This unit will not operate unless the door is placed in the correct position. 8. Plug the unit into a 120V electrical outlet. AIR PURIFIER PARTS QuietFlo™ 115 FIGURE 1 QuietFlo™ 115 FIGURE 2 GRILL VENTS HOOK TAPE HOOK TAPE TABS FRONT GRILL PREFILTER HEPA FILTER PRESS TO PULL OPEN FRONT GRILL QuietFlo 0 1 2 3 FORM 41477-01 Rev 1-29-2001 4 © 2001 HUNTER FAN CO. Operating Your Air Purifier On/Speed Control: Rotate the Speed Control knob to set the desired speed. A setting of zero (0) indicates that the unit is off, one (1) is low speed, two (2) is medium speed, and three (3) is high speed. The fan speed can be adjusted at any time. Cleaning And Filter Replacement 1. Clean the outside of the unit with a soft, damp cloth. The front grille can be removed and cleaned in soapy water. Remove the pre-filter before cleaning the front grille. 2. At least every 90 days, open the front grille, remove the carbon pre-filter, and replace it. This is necessary to maintain proper odor-removing and overall filtration performance. If necessary, it can be changed more often. Mark the new filter installation sticker included with the new carbon pre-filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it into the Air Purifier. 3. While replacing the pre-filter, you should view the condition of the QuietFlo...