Votos - 1, Puntuación media: 4 ( )

Fabricar: Samsung Tamaño del archivo: 838.71 kb Nombre del archivo: Idioma del manual:

• Install the appliance properly on the flat and firm surface. Install appliance in the available space. • Allow 1 foot(30cm)from the ceiling, and 2 inches( 5cm ) from the wall. About 30cm About 5cm About 5cm Install appliance in the appropriate location. • Place the appliance away from sunlight or heat. Install appliance in a damp place. • There is a risk of eletric shock or malfunctions. Specification of electric power. • The electric power specification of the appliance is attached inside at the top of the door or outside at the back. Do not use any extension cords or double adaptors. • Do not plug several appliances into the same multiple power board. This could cause over heating and the risk of fire. Earthing the appliance. • If the socket is the 2-legged type, the appliance must be earthed. • Do not connect the earthing wire to the gas pipes or telephone lines. Replacing the lamp. 1. Unplug the power cord from the socket. 2. Remove Chilled tray. 3. Unscrew by plus-type driver then take out lamp cover. (optional model only) 4. Turn the lamp counter clockwise. 5. Replace new lamp same specification as original one. Warning ! : Disconnect power supply before replacing the lamp. SETTING UP THE REFRIGERATOR ICE MAKING Fill the ice tray with 1) Step 1 water at about 80% of Clean up inside of the refrigerator with a its capacity, or at its clean cloth. “water level” indicator. Step 2 Insert the power plug into the socket while keep the door open for checking the interior light, Then turn the temperature control button to “MAX”. Step 3 Close the door and let the refrigerator operate for 2-3 hours. Step 4 Check the refrigerator temperature by touching inside the freezer. 2) Carefully place the ice tray on the freezer shelf otherwise the splashed water will be frozen and cause the ice tray is stuck hard. 3) Temp. Control For making quick ice cubes, the temperature control button must be set to “MAX” 4) The water will become the ice cubes with in 3-4 hours. Please remove the ice tray by pulling it out. Never use any kind of instrument. This may cause damage on the freezer. To take the ice cubes of the the ice cube tray, you should gently twist the ice tray (As shown), Do not bend it over. 5) Step 5 The appropriate temperature should be controlled by turing the temperature control button to “4”, or the desired temperature can be adjust. Now your refrigerator is ready to work. NOTE : After unplug the appliance, wait for about 5minutes before restarting. Wait 5 minutes TEMPERATURE CONTROL DEFROSTING The temperature control is level “2” • The temperature at low level “2” is used if extreme cool is no used. • It is used when there is not much food in the refrigerator. Temp. Control The temperature control level “4” • The temperature at level “4” is suitable for storing food. • It is appropriate for operating the refrigerator. Temp. Control The temperature control level “MAX” • “MAX” is properly used if the power cool is in need. • It is used when there ar...

Descargar ahora

Introduzca dos números de la imagen: