Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
3) Temp. Control For making quick ice cubes, the temperature control button must be set to “MAX” 4) The water will become the ice cubes with in 3-4 hours. Please remove the ice tray by pulling it out. Never use any kind of instrument. This may cause damage on the freezer. To take the ice cubes of the the ice cube tray, you should gently twist the ice tray (As shown), Do not bend it over. 5) Step 5 The appropriate temperature should be controlled by turing the temperature control button to “4”, or the desired temperature can be adjust. Now your refrigerator is ready to work. NOTE : After unplug the appliance, wait for about 5minutes before restarting. Wait 5 minutes TEMPERATURE CONTROL DEFROSTING The temperature control is level “2” • The temperature at low level “2” is used if extreme cool is no used. • It is used when there is not much food in the refrigerator. Temp. Control The temperature control level “4” • The temperature at level “4” is suitable for storing food. • It is appropriate for operating the refrigerator. Temp. Control The temperature control level “MAX” • “MAX” is properly used if the power cool is in need. • It is used when there are a lot of food. Temp. Control Defrosting should be often operated, as the thick frost (1/4inch) may cause low efficiency of the refrigerator. 1) If the thick frost is over the red level, should push the defrosting button. Check level 2) As soon as the “Push Defrosting” is pushed, the frost is gradually defrosting. 3) Do not use a knife or other metal instruments to remove ice/frost. It may cause damage on the freezer. 4) After defrosting, the button will pop up and the refrigerator working properly. NOTE : To save energy consumption, Do not set the refrigerator temperature lower than necessary USING THE WATER DISPENSER (MODEL WITH WATER DISPENSER ONLY) If dringking water is needed, push the To refill the water tank, remove the cap water dispenser lever with a glass. and fill it up with drinking water, then keep the cap into place. When you want to clean water tank, let water out of the tank. Remove away from . then remove the water tank from the locking device by lifting it up. Remove the lid . by pulling outward straightly. Wash it with detergent and warm water, then wash with clean water. After drying it with a clean cloth, place it correctly. Steps to Operate the water dispenser 1. The water tank should be cleaned up firstly before use, as the dust and bad smell can be removed. 2. The water tank should be filled up with pure drinking water. The water dispenser devices might be damaged by the syrup, soft drink, and hot water. 3. If the appliance has just been installed, please let 3 or 4 glasses of water away to remove the dust and plastic smell of the water tank. 4. To prevent soaking on the floor, you should softly push the water dispenser lever with a glass, then pull it backward slowly and wait until the last drop of water. 5.The accessories should be removed for cleaning up at least 1-2 times ...
Otros modelos de este manual:Refrigeradores - RA18FHS (838.71 kb)
Refrigeradores - RA18FHSS (838.71 kb)
Refrigeradores - RA18FHTT (838.71 kb)
Refrigeradores - RA18VHT (838.71 kb)