Refrigerant The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless flammable. • During transportation and installation of the appliance, be certain that none of the components of the refrigerant circuit become damaged. • If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition; – thoroughly ventilate the room in which the appliance is

Frost-free freezers also offer efficient and effective freezing with quicker, more even chilling for better food preservation. Food never sticks together or gets frosted over so you can easily find what you are looking for. In addition, we have the first 50:50 total frost-free fridge freezer. A unique air circulation system ensures that both the fridge and the freezer remain frost and condensation free. All other fridges in the range also feature “ auto-defrost” . Frostmatic. The Frostmatic feat

If unit is damaged or parts are missing, notify your Absocold dealer at once. INSTALLATION REQUIREMENTS Remove all packing material and tape. Install on a level floor or well-supported counter. Avoid any direct sunlight, heat source, or moisture. This refrigerator is designed to be freestanding — that is, the appliance is to be installed at least 1.” from the wall and the cabinet bottom is at least .” to 1” above the floor or carpet, in order to let the air circulate freely around the refrigerat

They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. These operating instructions are for use with several technically comparable models with varying accessories. Please observe the notes which apply to your model. Notes which are important for your safety or for the proper functioning of the appliance are stressed with a warning triangl

Wait 24 hours for the entire cabinet to cool, then adjust controls if needed. Setting to MIN is warmest. Ice cream is the best check of freezer temperature. When ice cream is hard to serve, the freezer is colder than needed. Never turn Cold Control to OFF unless both compartments are empty. Vacuum the tubing on the outside back when dusty. Any time you won’t be using your refrigerator regularly, such as during vacation, empty and unplug it. Clean inside and block doors open. FOR ALL CLEANING: Mi

is shown on the rating plate; • the freezing process takes 24 hours. No further food to be frozen should be added during this period; • only freeze top quality, fresh and thoroughly cleaned, foodstuffs; • prepare food in small portions to enable it to be rapidly and completely frozen and to make it possible subsequently to thaw only the quantity required; • wrap up the food in aluminium foil or polythene and make sure that the packages are airtight; • do not allow fresh, unfrozen food to touch f

Ihr Kuhlgerat braucht Luft Aus Grunden der Sicherheit mu. eine Mindestbeluftung gesichert sein, wie aus der Abb. hervorgeht: Achtung: Die Luftungs-Offnungen mussen immer saubergehalten werden. Damit die Luft zirkulieren kann, die Luftungsoffnungen niemals abdecken oder verstellen. Hintere Abstandstucke Im Beipack sind 2 Distanzstucke enthalten, die wie in der Abbildung gezeigt montiert werden mussen. Die Distanzstucke in die Offnungen einsetzen (Pfeil A gema. Abb. gerichtet) und dann um 45°C bis

Readjust the feet. Move the appliance slightly. The compressor starts after a period of time. See the "Cleaning and Care" section. If after all these checks your appliance does correctly, contact your local AEG Service Force Centre. Please note that it will be necessary to proof of purchase for any in- guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make if the fault is not a mechanical electrical breakdown. Energy Saving Ti

Maintenance Defrosting Defrosting is automatic in this model. Regular cleaning Clean the equipment regularly. Do not use detergents, abrasive or strong odorous cleaners, waxy polishing agents or disinfectants or alcoholic products for cleaning the equipment. Before cleaning remove the plug from the mains supply. Internal cleaning Clean the internal parts of the equipment and the accessories with warm water and sodium bicarbonate (5 ml to 0.5 litre of water). Rinse and dry everything thoroughly.