Once the Security Code is activated, the entry of authorized Security Code is required to turn on the audio unit when it is removed from the vehicle. Indication of this Security Code activation prevents your precious audio unit from stealing. . • You can set the Security Code with a 4 digit number of your choice. • The Security Code cannot be displayed or referenced. Make a note of the Security Code and treasure it up. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. Refer to (page 8). 2 Enter Menu mode Using the Control knob, select "MENU". For the operation method, refer to (page 11). "Security Set" is displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "SECURITY SET" is also displayed. 4 Select the digits to enter Push the Control knob towards right or left. 5 Select the Security Code numbers Turn the Control knob or push it towards up or down. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "SECURITY SET" is also displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "Approved" is displayed. The Security Code function activates. . • If you enter the wrong Code in steps 4 through 6, repeat from step 4. 9 Exit Security Code mode Press the [FNC] button. Resetting the Security Code function when the audio unit is first used after removed from the battery power source or the Reset button is pressed 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "Approved" is displayed. Now, you can use the unit. . • When the Security Code function is activated, "Security Set" changes to "Security Clear". • To deactivate the Security Code function, see the next section . In Standby mode Deactivating Security Code To deactivate the Security Code function. 1 Select Security Code mode Turn the Control knob. Select the "Security Clear" display. 2 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "SECURITY CLEAR" is also displayed. 3 Select the digits to enter Push the Control knob towards right or left. 4 Select the Security Code numbers Turn the Control knob or push it towards up or down. 5 Repeat steps 3 and 4, and complete the Security Code. 6 Press the Control knob for at least 3 seconds. "Clear" is displayed. The Security Code function deactivates. 7 Exit Security Code mode Press the [FNC] button. . • If a wrong security code is entered, "Error" is displayed. Enter a correct security code. English | 45 Menu system In Standby mode Source Select Mode Setting up the Source Select mode. Display Setting "SRC Select : 1" Displays source icons for your choice. "SRC Select : 2" Allows you to select sources one after another. In USB mode with iPod connected iPod mode setting Setting up the iPod operation method in File Select. Display Setting "iPod Mode : ON" Uses the operation method similar to that of iPod. "iPod Mode : OFF" Uses the operation method different from that of iPod. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display Setting "Beep : ON" Beep is heard. "Beep : OFF" Beep canceled. In Standby mode Manual Clock Adjustment . • You can do this adjustment when the (page 47) is set as OFF. 1 Select Clock Adjustment mode Turn the Control knob. Select the "Clock Adjust" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Selecting the item (hours or minutes) to adjust Push the Control knob towards right or left. The items that are blinking are items that you can adjust. 4 Adjust each item Turn the Control knob or push it towards up or down. 5 Exit Clock adjustment mode Press the [FNC] button. In Standby mode Date Adjustment 1 Select Date Adjust mode Turn the Control knob. Select the "Date Adjust" display. 2 Enter Date Adjust mode Press the Control knob for at least 1 second. The date display blinks. 3 Selecting the item (day, month, or year) to adjust Push the Control knob towards right or left. The items that are blinking are items that you can adjust. 4 Adjust each item Turn the Control knob or push it towards up or down. 5 Repeat step 3 and 4 operation and adjust the date. 6 Exit Date adjustment mode Press the [FNC] button. 46 | English In Standby mode Date Mode Setting the date format. 1 Select Date Mode Turn the Control knob. Select the "Date Mode" display. 2 Enter Date mode Press the Control knob for at least 1 second. 3 Select the date format Turn the Control knob or push it towards up or down. 4 Exit Date mode Press the [FNC] button. In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit’s clock. Display "SYNC : OFF" "SYNC : ON" Setting Adjust the time manually. Synchronizes the time. . • It take...
)
