Desconecte y retire el radio. Pase a la página de montaje del kit. DODGE DAKOTA 2001-2004 DURANGO 2001-2003 1 Desconecte el terminal negativo de la batería, a fin de evitar un cortocircuito accidental. 2 Retire (3) tornillos de cabeza Torx T-20 del borde inferior del panel que se encuentra debajo de la columna de la dirección y quite a presión para retirar el panel. 3 Retire (2) tornillos Phillips del panel de grupo de instrumentos que se encuentra arriba de los indicadores. 4 Retire (3) to

(únicamente Concorde). 3 Desenganche el panel de terminación de la palanca de velocidades y deslice el panel de terminación hacia la parte trasera del vehículo. 4 Desenganche el panel de terminación del tablero y desconecte el cable del panel de terminación. 5 Retire (4) tornillos de cabeza Phillips que v sujetan el radio. Desconecte y retire el radio. Pase a la página de montaje del kit. CHRYSLER PT CRUISER 2DD1-2DD5 1 Desconecte el terminal negativo de la batería, a fin de evitar un corto

1 Kit Assembly: pg. 2 Final Assembly: pg. 3 WIRING AND ANTENNA CONNECTIONS (Sold Separately) • 40-EU10 - European antenna adapter • 70-9003 - European harness a 1-800-221-0932 Q REV. 04-17-09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION DASH DISASSEMBLY 99-9303 BMW Z4 2003-2008 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. NOTE: Make sure the vent on/off dials are in the middle position. 2 Using a small flat blade screwdriver, release th

INSTALLATION INSTRUCTIONS FOR PART 99-9103 APPLICATIONS Audi A4 2001-2007 WITH THE CONCERT RADIO 99-9103 KIT FEATURES DIN Head Unit Provisions KIT COMPONENTS A) Radio Housing TOOLS REQUIRED: -9001 Head Unit Removal Keys • Flat Blade Screwdriver a 1-800-221-0932 Q © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION TABLE OF CONTENTS 99-9103 • Dash Disassembly •Audi A4 - 2001-2007 -----------------------------------------1 •Kit Assembly - DIN Head Unit Provision ----------------

10-07-10 99-8712 TABLE OF CONTENTS 1-2 3 4 KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto or call 800-354-6782 for more information and take steps toward a better tomorrow. Dash Disassembly Kit Assembly .... Final Assembly .. 99-8712 DASH DISASSEMBLY 2005-2007 MERCEDES BENZ C CLASS A 1 Disconnect the negative battery terminal to prevent an accidental short circu

Continue to Final Assembly. C 4 99-8214KITASSEMBLY99-8214KITASSEMBLY DOUBLE DIN HEAD UNIT PROVISION A 1 Slide the aftermarket radio unit into the factory brackets and secure the unit to the brackets using the screws supplied with the head unit. (Figure A) 2 Secure the aftermarket radio unit and factory bracket assembly into the sub dash. (Figure B) 3 Place the Double DIN trim plate into the back of the radio housing, then attach the clock/hazard switch brack- et assembly using the (4) #6 x 3/8”

• A) Radio Housing • B) Radio Housing Brackets KIT COMPONENTS A B C D APPLICATIONS Toyota Tacoma 2005-2011 • C) Radio Housing Trim Panel • D) ISO Brackets • E) ISO Trim Plate • F) (4) #6 x 3/8” Phillips Pan Head Screws • G) (4) #8 X 3/8” Phillips Truss Head Screws • H) Double DIN Trim Plate • I) Clock/Hazard Switch Bracket E F G H 99-8214TB 99-8214TG TOOLS REQUIRED: I WIRING AND ANTENNA CONNECTIONS (Sold Separately) Harness: • 70-1761 - Toyota harness 1987-up • TYTO-01 - Toyota amp interface har

. . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . 3 -DIN Mount Radio Provision with Pocket . . . . . . . . . . . . . . . . . . . . . . . .4 -ISO Mount Radio Provision with Pocket. . . . . . . . . . . . . . . . . . . . . . . . 5 -Double DIN /Stacked ISO Mount Units Radio Provision . . . . . . . . . . . . .6 Note: Refer also to the instructions included with the aftermarket radio. KNOWLEDGE IS POWEREnhanceyour installation and fabrication skillsbyenrolling inthe most

..1 Kit Preparation - Display Unit Assembly ................................... .2 Kit Assembly -Double DIN Head Unit Provision..............................3 -ISO Stacked Head Unit Provision............................ .4 *Note: Refer also to the instructions included with the aftermarket radio. Knowledge is power Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto or call 800-354-6782 f

3 *Note: Refer also to the instructions included with the aftermarket radio. 95-7330 DASH DISASSEMBLY KIA SPECTRA/SPECTRA 5 2007 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the trim panel surrounding the radio and including the a/c vents. (Figure A) 3 Remove (4) Phillips screws securing the radio. Unplug and remove radio. (Figure B) Continue to kit assembly. A 1 95-7330 KIT ASSEMBLY DOUBLE DIN RADIO PROVISION STACKED ISO MOUN