Votos - 4, Puntuación media: 4 ( )

Fabricar: AT&T Tamaño del archivo: 79.37 kb Nombre del archivo: Idioma del manual:

Adjusting the Display The display contrast is controlled as follows: Note: Not all display terminals have a contrast control dial. To adjust the contrast on 1 Move the Contrast dial the display upward to increase the contrast of the display 2 Move the Contrast dial downward to decrease the contrast of the display Local Mode Displays To display time/date related information while you are on a call 1 Press Disp-Norm • Green light goes out Local mode is activated, and time, day and date are displayed 2 Press Set Alarm is displayed 3 Press Set | again Timer is displayed 28 To set the display clock Note: When your voice terminal is first powered up, or when power to the voice terminal is interrupted, 12:00a Su 01-01 | flashes on the display. 1 Press Disp-Norm if you are in Normal mode, otherwise start at step 2 • Green light goes out Local mode is activated, and time related information is displayed 2 Press Set | until time, day and date information is displayed Time related information is displayed • Time (hh:mma/p) is flashing 3 Press Timer/Fwd or Timer/Rev until the correct time appears 4 Press Set | to save the correct time and to display the day Day is flashing 5 Press Timer/Fwd or Timer/Rev until the correct day appears 6 Press Set | to save the correct day and to display the date (mm-dd) Date is flashing 7 Press Timer/Fwd or Timer/Rev until the correct date appears 8 Press Set | to save the correct date 9 Press Time/Exif] to save time, day and date 29 To set the timer when you are on a call To set the alarm l Press Disp-Norm Green light goes out Local mode is activated, and time related information is displayed Z Press Set I until the timer display appears Timer is set at О 3 Press Timer/Start to start the timer 4 Press Timer/Stop to stop the timer 5 Press Timer/Exit to exit timer and to display time, day and date 1 Press Disp-Norm if you are in Normal mode, otherwise start at step 2 Green light goes out Local mode is activated, and time related information is displayed 2 Press Set | until the alarm display appears • Alarm (hh:mma/p) is flashing 3 Press Timer/Fwd or Timer/Rev to set the time on the alarm 4 Press Set | to save 5 Press Timer/Exit to exit alarm and display time, day and date Note: The alarm will send 3 sets of 3 short beeps at the programmed time. З0 Normal Mode Displays To display called party information for an internal call Dial extension or select call appearance Green light goes on steadily Normal mode is activated, and time related information is cleared Each digit entered is displayed until a complete extension is dialed After extension is accepted, the name of called party and miscellaneous identifier (if applicable) are displayed on line 1 (See Key Words to Know for a list of miscellaneous identifiers.) 2 Press Scroll Extension of called party is displayed on line 2 1 To display called party information for an outside call 1 Dial the outside number or select a call appearance Green light goes on steadily Normal mode is activated, and time related information is cleared Each digit entered is displayed until a complete number is dialed Note: If the trunk group is set to NO, digits 1-14 are displayed on line 1, and 15-32 are automatically scrolled on line 2. If the trunk group is set to YES, the trunk name is displayed on line 1, and the trunk access code is displayed on line 2. The default trunk name is "OUTSIDE CALL." 31 To display calling party information for an incoming internal call To display calling party information for an outside call 1 While on-hook Green light (next to the call appearance with the incoming call) flashes and the voice terminal rings Normal mode is activated, time related information is cleared, and the green light (next to the disp-norm button) goes on steadily Name of calling party and miscellaneous identifier (if applicable) are displayed on line 1 2 Press Scroll Extension of the calling party is displayed on line 2 3 Pick up handset to receive call Note: If internal automatic answer is activated, Step 3 is unnecessary (the call is automatically answered). 1 While on-hook Green light (next to the call appearance with the incoming call) flashes and voice terminal rings Normal mode is activated, time related information is cleared, and the green light (next to the disp-norm button) goes on steadily "OUTSIDE CALL" is displayed on line 1 (if the trunk group has no name administered) 2 Pick up handset to receive call 32 To display calling party information for an incoming internal call, when connected to another call 1 Automatic Incoming Call Identification is activated Name of the calling party and miscellaneous identifier (if applicable) are displayed on line 1 2 Press Scroll Extension of the second or subsequent caller is displayed on line 2 3 Press Hold to place first call on hold 4 Receive the second call Note: If you remain on the first call and the incoming ...

Descargar ahora

Introduzca dos números de la imagen: