This item is a toy for dolls only. For children ages three (3) years and older. MODEL #: NAME: 00364 Pink Rosebud, 00367 Pink Gingham Folding Doll Cradle with Hood TOOLS NEEDED: Phillips Screwdriver PARTS INCLUDED: (A) 2 - Side Panels (B) 1 - Upper Support Bar (C) 1 - Lower Support Bar (D) 6 - Bolts (E) 1 - Cradle Body (F) 2 - Washers (G) 2 - T-Nuts (H) 1 - Cradle Mattress with Sheet BEFORE YOU BEGIN ASSEMBLY: Ensure that all the parts and hardware listed above are included. If an

Attach the CRADLE BODY (E) to the UPPER SUPPORT BAR (B) using the predrilled holes, TWO BOLTS (D), TWO WASHERS (F), and TWO T-NUTS (G). Insert the bolts (with washers) through the holes on the cradle bottom, then insert them through the holes on the upper support bar, and then secure the ends of the bolts in place on the underside of the support bar using the T-Nuts. STEP 3: See PICTURE 3. Unfold the two metal supports inside of the cradle body and lock them in place by putting one side behind

Save these instructions for future use. Visit us online at Toll-Free Customer Service: 1-800-236-1310 (Monday through Thursday 7:30 AM to 4:30 PM CST) Web: • E-mail: parts1@badgerbasket.com Mail: PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163 Page 1 of 6 3.0/1108/TG BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store where purchased or return the product to them. Contact Badger Basket for as

Attach the rails to the INSIDE FACE of the END PANEL. The inside face has countersunk areas for the rails and slots that you will use later for the mesh basket. Position the bottom rails with the grooves facing up; and position the top rails with the grooves facing down. Slip the TWO NYLON SNAP STRAPS (D) over the TOP RAILS (B). Position them so that they are ready to snap to the snaps on the bassinet body (H). STEP 2: See PICTURE 2. Attach the second END PANEL (A) to the FOUR RAILS (B) using FO

• READ ALL INSTRUCTIONS before use of this product. Keep instructions for future use. Product and/or hardware may include small parts or screws with sharp points. • Choking Hazard! Keep unassembled parts out of the reach of small children. Use only the parts and hardware provided by Badger Basket. • Do not use the bassinet if it is damaged or broken. • Periodically check to make sure all the bolts and screws remain tight. Page 2 of 6 3.0/1108/TG PARTS & HARDWARE: TOOLS NEEDED: Phillips Screwdriv

If anything is missing or you have any questions, PLEASE DO NOT RETURN THE PRODUCT TO THE STORE. E-mail parts1@badgerbasket.com for assistance or contact us at the phone number below. Or, for fastest service, go to: PICTURE 1 If desired, you can launder the bumper/liner and sheet before use. Follow the Care Instructions below. Put the sheet onto the mattress pad making sure all edges of the sheet wrap around the sides to the underside of the pad. Sheet must fit properly and not be loose. Loo

MOSES BASKET SAFETY & ASSEMBLY INSTRUCTIONS Adult Assembly Required. Save these instructions for future use. PRODUCT MODEL NUMBERS: NATURAL HOODED MOSES BASKET: □ 00870 - Pink Waffle □ 00871 - Blue Waffle □ 00872 - Sage Waffle □ 00873 - Ecru Waffle □ 00874 - Sage Gingham □ 00875 - Beige Gingham □ 00876 - Pink Gingham □ 00877 - Blue Gingham NATURAL MOSES BASKET (NO HOOD) □ 00883 - Sage Waffle □ 00889 - Pink Gingham □ 00890 - Blue Gingham □ 00891 - Sage Gingham □ 00892 - Beige G

If anything is missing or you have any questions, PLEASE DO NOT RETURN THE PRODUCT TO THE STORE. E-mail parts1@badgerbasket.com for assistance or contact us at the phone number below. Or, for fastest service, go to: PICTURE 1 If desired, you can launder the bumper/liner and sheet before use. Follow the Care Instructions below. Put the sheet onto the mattress pad making sure all edges of the sheet wrap around the sides to the underside of the pad. Sheet must fit properly and not be loose. Loo

If anything is missing or you have any questions, PLEASE DO NOT RETURN THE PRODUCT TO THE STORE. E-mail parts1@badgerbasket.com for assistance or contact us at the phone number below. Or, for fastest service, go to: PICTURE 1 If desired, you can launder the bumper/liner and sheet before use. Follow the Care Instructions below. Put the sheet onto the mattress pad making sure all edges of the sheet wrap around the sides to the underside of the pad. Sheet must fit properly and not be loose. Loo

If anything is missing or you have any questions, PLEASE DO NOT RETURN THE PRODUCT TO THE STORE. E-mail parts1@badgerbasket.com for assistance or contact us at the phone number below. Or, for fastest service, go to: PICTURE 1 If desired, you can launder the bumper/liner and sheet before use. Follow the Care Instructions below. Put the sheet onto the mattress pad making sure all edges of the sheet wrap around the sides to the underside of the pad. Sheet must fit properly and not be loose. Loo