Votos - 4, Puntuación media: 4 ( )

Fabricar: Black & Decker Tamaño del archivo: 2.36 mb Nombre del archivo: Idioma del manual:

When not in use, before servicing; when changing accessories such as blades, bits, cutters, etc. 17. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit* qf checking to see that keys and adjusting wrenches are removed from tool before turning it on. 18. AVOID ACCIDENTAL STARTING. Don't carry plugged-in fool with finger on switch. Be sure switch is off when plugging in. 19. OUTDOOR USE EXTENSION CORDS — When tool is used outdoors, use only extension cords suitable for use outdoors and so marked. 20. DO NOT OPERATE portable electric tools in gaseous or explosive atmospheres. Motors in these tools normally spark, and the sparks might ignite fumes. 2 CAUTION; When drilling into walls, floors or wherever “live” electrical: wires may be encountered, DO NOT TOUCH THE CHUCK OR ANY' FRONT METAL PARTS OF THE TOOL! Hold the Tool only by the insulated gripping handles provided (see Fig. 1). Always use side handle provided in order to properly control torque (twisting action) of the drill. GROUNDING This tool should be grounded while in use to protect the operator from electric shock. The topi is equipped with an approved three-conductor cord and three-prong grounding type plug to fit the proper grounding type receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect the green (or green and yellow) wire to a live terminal. If your unit is for use on less than 150 volts, it has a plug like that shown in Figure A. If it is for use on 150 to 250 volts, it has a plug like that shown in Figure D. An adapter. Figures B and C, is available for connecting- Figure A plugs to two-prong receptacles. The green-colored rigid ear, lug, etc, must be connected to permanent,,ground such as a properly grounded outlet box. No adapter is available for a plug as shown in Figure D, Adapter shown in Figures B & C is not for use in Canada. &MUNDE0 OUTLET BOX • PRONG IS WHIT Iff THE 3 PRONGS © © , ADAPTER . MEANS GROUNDED OUTUET BOX * PRONG IS L0H8EST0F THE 3 PRONGS © © We recommend that you NEVER disassemble the tool or try to do any rewiring in the electrical system. Any such repairs should be performed only by B&D Service Centers or other qualified service organizations. Should you be determined to make a repair yourself, remember that the green colored wire is the “grounding” wire. Never connect this green wire to a “live” terminal. If you replace the plug on the power cord, be sure to connect the green wire only to the grounding (longest) prong on a 3-prong plug. 3 EXTENSION COii When using the tool at a considerable distance from power source,-a 3-conductor, grounding-type extension cord of adequate size must be used for safety, and to prevent loss of power and over-heating. Use the table below to-determine minimum wire size. Use only three wire extension cords which have three-prong grounding-type plugs and three-pole receptacles which accept the tool's plug. Replace or repair damaged cords. Ampere rating (on na...

Descargar ahora

Introduzca dos números de la imagen: