Votos - 5, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Then when you press the shutter button, the camera records the monitor screen image and the area enclosed in the selection boundary, digitally zoomed to twice its normal size. Recording with Normal-speed Continuous Shutter, High-speed Continuous Shutter, and Flash Continuous Shutter 1. Press the shutter button to shoot. • With Normal-speed continuous shutter and High-speed continuous shutter, images continue to be shot as long as you keep the shutter button depressed. Releasing the Selecting the Continuous Shutter Mode 1. In the REC mode, press [MENU]. 2. On the “REC” tab, select “Continuous” and then press [..]. 3. Use [..] and [..] to select the mode you want and then press [SET]. This enables the continuous shutter mode you selected and displays its icon on the monitor screen. To turn off continuous shutter, select “Off”. shutter button stops shooting. • Flash continuous shutter can shoot up to three images. Shooting stops if you release the shutter button before three images are recorded. IMPORTANT! • The speed of normal speed continuous shutter and high- speed continuous shutter depend on the type of memory card being used and the amount free space available in memory. When shooting to built-in memory, continuous shutter shooting is relatively slow. SHOOTING A SNAPSHOT 79 Recording with Zoom Continuous Shutter 1. Use [..], [..], [..], and [..] to move the selection boundary around the image of the subject on the left side of the monitor screen until it is located at the part you want to enlarge, and then press [SET]. This will enlarge the area within the boundary and display it in the right side of the monitor screen. 2. Press the shutter button to shoot. Both the left image and the right image will be recorded. IMPORTANT! • Note that with zoom continuous shutter, you do not need to keep the shutter button depressed. • Digital zoom is disabled while shooting with zoom continuous shutter. • Zoom continuous shutter is not available when the image size setting is 3:2 (3648 . 2432 pixels) or 16:9 (3648 . 2048 pixels). • When the image size setting is 10M (3648 . 2736 pixels) or 5M (2560 . 1920 pixels), the size of the zoomed image produced by zoom continuous shutter is 3M (2048 . 1536 pixels). • When Auto Focus is selected as the focus mode, the metering mode automatically switches to “Spot” (pages 108, 120) and locates the Auto Focus area in the center of the Zoom Continuous Shutter selection boundary. SHOOTING A SNAPSHOT 80 Continuous Shutter Precautions • Starting a continuous shutter operation causes the exposure and focus settings to be fixed at the levels for the first image. The same settings are applied to all subsequent images. • Continuous shutter cannot be used in combination with any of the following features. – Some BEST SHOT scenes (Layout, Auto Framing, Business Cards and Documents, Whiteboard, etc., Old Photo, Voice Recording) – Movie mode – “ Tracking” selected for “AF Area” • When using a continuous shutter mode, keep the camera still until all recording is finished. • A continuous shutter operation may stop part way through if memory capacity runs low. • The continuous shutter rate depends on the current image size and image quality settings. • You can select the flash mode you want with normal-speed continuous shutter mode. • With high-speed continuous shutter, the flash mode automatically becomes “ ” (flash off). • With the flash continuous shutter mode, the flash mode automatically becomes “ ” (flash on). • You cannot use the self-timer in combination with the normal- speed continuous shutter mode or high-speed continuous shutter mode. • Triple Self-timer can be used in combination with the zoom continuous shutter mode only. • Note that the resolution of images recorded with the high- speed continuous shutter mode or flash continuous shutter mode is somewhat lower resolution and more prone to digital noise than images recorded with the normal-speed continuous shutter mode. • “Auto” ISO sensitivity always is used for the high-speed continuous shutter mode or flash continuous shutter mode, regardless of the current ISO sensitivity setting. • With the flash continuous shutter mode, the flash range is narrower than normal. SHOOTING A SNAPSHOT B 81 Adding Audio to a Snapshot Adding Audio to a Snapshot You can add an audio recording to snapshots, if you want. Use this feature to add a verbal explanation or a description of the mood to a snapshot, or to capture the sounds of the people in the snapshot. • You can record up to about 30 seconds of audio for a single snapshot. ¦ Turning on Audio Snapshot 1. In the REC mode, press [MENU]. 2. On the “REC” tab, select “Audio Snap” and then press [..]. 3. Use [..] and [..] to select “On” and then press [SET]. ¦ Recording Audio for a Snapshot 1. Press the shutter button to shoot. This monitor screen will show the image you just shot, along with the “ ” icon. • If you do not want to record audio at this time, press [MENU]. This will display the monito...