Votos - 3, Puntuación media: 4 ( )

Fabricar: Flymo Tamaño del archivo: 9.4 mb Nombre del archivo: Idioma del manual:

Fotos y especificaciones  Flymo  MULTIMO 360XC

Assembly of Lower Handles to Lawnmower C1 C2 C3 1. Pull the lower handle bolt until it locks into position as illustrated in fig C1. 2. Place the Spring over the Bolt (C2) 3. Insert the Pivot Block on to the Bolt (C3) Repeat for the other side. D1 D3 D4 x3 pivot block lower handle washer cam lock D2 E1 E2 x3 E4 E5 E6 4. Fold down the Cam Lock towards the Handle as illustrated in fig E4, and continue to turn clockwise (E5) until tightened. 5. The Cam Lock can be unlocked and locked as illustrated in fig E6. Repeat for the other side. E3 Assembly of Upper Handles to Lower Handles 1. Insert the Barrel Nut into the Cam Lock as illustrated in fig E1. 2. Attach the Upper Handle to the Lower Handle with the Round Headed Bolt, Washer and Cam Lock as illustrated in fig E2 3. Turn the Cam Lock 3 times clockwise, as illustrated in fig E3. Grassbox Assembly G1 G2 Grassbox Handle Assembly 1. Locate the grassbox handle into the slots in the grassbox upper and push until it clicks into position. (F1) 2. Looking at the underside of the lid (F2), ensure the clips of the grassbox handle are securely located. Grassbox Assembly 1. Locate the the grassbox halves together by aligning the clips Ensure all clips are correctly located before clicking into position. (G1) 2. Locate the grassbox lid onto the assemble grassbox by aligning the clips. Ensure all clips are correctly located before clicking into position (G2) Fitting Fully Assembled Grassbox to Lawnmower. 1. Lift safety flap (H1) 2. Make sure the discharge chute is clean and free from debris (H2) 3. Locate fully assembled grassbox onto 2 location points (H3) at the rear of the deck as illustrated in pic. J 4. Locate safety flap onto the top of the grassbox. Ensure the grassbox is securely located. • IMPORTANT ! AFTER FITTING ENSURE NO GAP REMAINS BETWEEN THE SAFETY FLAP AND THE GRASSBOX. • Removal is the reverse procedure. • For larger areas of grass where grass collection is not required you can use your lawnmower without the grassbox. The design of the safety flap permits the cut grass to be discharged downward behind the machine. H 1 3 J PAGE 6 2 F1 F2 PAGE 7 N grassbox empty grassbox full P1 P2 P3 P4 Using as a mulcher 1. Your lawnmower is supplied with a mulching plug. (P1) 2. Stop your lawnmower as described in Starting and Stopping. 3. Lift safety flap and insert the mulching plug into rear discharge chute. (P2) ensuring it is securely fitted. (P3) 4. The mulching plug prevents grass from being collected by blocking the collection chute on the underside of the deck. (P4) Grassbox Full Window • As the grassbox fills up, grass will be visible through the window (N). • When the window/grassbox is full it is time to empty the grassbox. Mulching Plug Your product can be used to cut grass using the following methods:- 1. Grassbox Fitted:- grass is collected effectively and compacted into the grassbox. (K) 2. Rear Discharge:- Effectively cuts long grass with no need to empty the grassbox (L) 3. Mulch Plug Fitted:- grass cuttings are finely chopped to return nutrients to your lawn (M). See ‘Mulching Plug’ on page 7. How to Mow 1. Start mowing the edge of the lawn nearest to the power point so the cable is laid out on the lawn you have already cut. 2. Mow twice a week during the growing season, your lawn will suffer if more than a third of its length is cut at one time and this may also result in poor collection. Do Not Overload Your Mower Mowing long thick grass may cause the motor speed to drop, you will hear a change in the motor sound. If the motor speed drops you may overload your lawnmower which may cause damage. When mowing in long thick grass a first cut with the cutting height set higher will help reduce the load. See Cutting Height Adjustment. How to Mow K L M Cutting Height Adjustment Removing and Fitting the Blade Switch off, wait until the blade has stopped rotating and disconnect from the mains electricity supply BEFORE attempting to remove or refit the blade. Always handle the blade with care - sharp edges could cause injury. USE GLOVES. Removing the Blade 1. To remove the blade bolt, hold the blade firmly with a gloved hand and with a spanner, loosen the blade bolt by turning it anti-clockwise (X). 2. Remove the blade bolt, blade and adaptor. (X) 3. Inspect for damage and clean as necessary. Renew your metal blade after 50 hours mowing or 2 years whichever is the sooner - regardless of condition. If the blade is cracked or damaged replace it with a new one. Fitting the Blade 1. Attach the adaptor to the shaft. 2. Fit the blade to the adaptor ensuring that once it is fitted you are able to read the text on the blade ‘This side to grass’ 3. Re-assemble blade bolt through the blade and the adaptor. 4. Hold the blade firmly with a gloved hand and tighten the blade bolt firmly with a spanner. Do not over tighten. X blade blade bolt adaptor Cutting Height Adjustment • Height of cut is adjusted by raising or lowering the wheels using the height adjustment lever (Q...

Descargar ahora

Introduzca dos números de la imagen: