Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Prepare to experience your entertainment on a whole new level. BOOM CUBE™ allows you to HEAR the sound and FEEL the excitement. You’ll experience every crash, bang, and boom while enjoying your favorite game, music, or movie. BOOM CUBE™ is also a great game seat built to endure the rigors of today’s gaming environment. Take a moment to review your owner’s manual before connecting your BOOM CUBE™. Assembly and operation of the BOOM CUBE™ is simple and fun. If you need further assistance visit us at or BOOM CUBE™ is designed and manufactured by LumiSource, Inc. 2950 Old Higgins Road, Elk Grove Village, IL 60007 PATENTS PENDING 2 Boom Chair™, Boom Chair ™2.0, and Boom Cube™ is a trademark of LumiSource, Inc. Other trademarks are properties of their respective owners. ©2005 LumiSource, Inc. All rights reserved. & READ BEFORE USE • DO NOT wash or soak with water. If BOOM CUBE™ gets wet, disconnect power immediately and do not use until completely dry. • Switch power off (0) and unplug Boom Cube™ when not in use. • Children under 5 years old should not use this product without parental supervision. • For INDOOR use only. DO NOT expose to direct sunlight, moisture, or extreme temperatures. • DO NOT use on slippery or uneven flooring. • Excessive exposure to audio equipment at high volume may lead to hearing loss. • DO NOT open bottom plate of the BOOM CUBE™ (see warning below). Internal • DO NOT OPEN Caution: To reduce the risk of electric shock and fire, do not remove the storage compartment of the BOOM CUBE™. There are no user serviceable parts inside. Refer to your warranty for service information. FCC CERTIFICATIONS This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Power rating: 12 Volts at 2500/mA 3 SET-UP GUIDE The BOOM CUBE™ comes with the following: PARTS LIST: 1) BOOM CUBE™ 2) AC/DC POWER SUPPLY 3a) RCA CORD (headphone jack to audio left & right channel connectors) 3b) RCA CORD (audio left & right channel connectors) 4) RECEPTACLE SYSTEM SPECIFICATIONS BOOM CUBE™ MULTIMEDIA FURNITURE Dimensions: 14” W x 14” L x 13.5” H Weight: 15 lbs. 2 - 3” coaxial side firing speakers @ 10W 4 Ohms 1 - 5” sub-woofer @ 30W 4 Ohms 1 - 12v AC/DC UL listed power adapter CONTROL PANEL 5 ASSEMBLY INSTRUCTIONS Step 1: Insert receptacle (4) into adapter (2). Step 2: Plug adapter (2) into outlet. Step 3: Flip power switch (A) to ON (I) position. Step 4: Refer to pages 7 & 8 for connection to audio device. ^ LID FLIPS UP FOR STORAGE ) UNDERNEATH CONNECTING TO GAME CONSOLES Note: All game consoles are supplied with a custom connector with yellow video out and RCA red/white audio out. Step 1: Plug yellow composite video cable from game console into video input of TV. (Fig. 1) Step 2: Plug Red/White RCA cord from game console into RCA INPUT (D) of BoomCube™. (Fig. 2) Alternate Connection: Connect directly fi'om the TV Audio Out to the BoomCube™ Audio Input using the RCA audio cords provided. GAME CONSOLE TV Cable supplied with game console Note: It may be necessary to extend your BoomCube™ further away from your TV or console. Here’s how. (Fig.3) Step 1: Connect Audio Coupler (not included) to Red/White RCA cord from game console. Step 2: Connect one end of RCA cord (3b) into other end of Audio Coupler. Step 3: Connect other end of RCA cord (3b) into RCA INPUT (D) of BoomCube™. AUDIO COUPLER BOOMCUBE™ (sold seperately) Fig. 2 CONNECTING TO HAND-HELD GAMES, MP3 PLAYERS & CD/DVD PLAYERS HAND-HELD GAMES MP3 PLAYERS CD/DVD PLAYERS M- 3a 1 Plug the single end of the RCA cord (3a) into the headphone jack of your device. Plug the pair of RCA cords into the RCA audio inputs (D) of the Boom Cube™. (3a) = headphone jack to audio left & right channel connectors TROUBLESHOOTING BOOM CHAIR™/BOOM CUBE™/BOOM CHAIR™ 2.0 Q: Why isn’t there sound coming from any of my speakers? A: Ensure your Boom Cube™ is connected as described in the Setup Guide. Check that the power to the unit is in the “ON” (I) position and the volume is turned up. Also, make sure your audio device is not set to “MUTE” and volume is turned up. Q: Why isn’t there sound coming from one of the speakers? A: Ensure the audio cord to the Boom Cube™ is securely connected as described in the Setup Guide. Make sure that both the left and right channel audio inputs and outputs are securely connected to the Boom Cube™ and audio device. Q: Where can I get more information? A: Visit us at or Contact information: LumiSource, Inc. 2950 Old Higgins Road, Elk Grove Village, IL 60007 E-mail: customerservice@lumisource.com ; MAINTENANCE AND REPAIR If a problem occurs while using this produ...