Fit the castors to the stub axles by applying hand pressure until each castor clicks into position - see Fig. 3. Note that the castors are designed to be a tight fit on the axles but will rotate in use. The castors can only be fitted between the outer fins (as shown in Fig. 2). Turn the radiator upside down on a carpet or other soft surface to avoid damage WARNING : THE RADIATOR IS HEAVY – ENSURE THAT IT IS SUPPORTED TO PREVENT IT FROM TOPPLING. Ask a second person to help with this if necessary

Warning – This appliance must not be used in a bathroom. Warning – Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. Warning – This heater must not be located immediately below a fixed socket outlet. Warning – Do not use in areas where petrol, paint or flammable liquids are used or stored. Follow these instructions carefully. The heater carries a warning ‘Do Not Cover’ to alert the user to the risk of fire that exists if the heater is accidentally cover

Note: The minutes can only be set in 10 minute blocks in programme ‘MODE’. SETTING P1 OFF TIME: 3. To set the hour use the ‘-‘ & ‘+’ buttons. Confirm the hour digit by pressing ‘ENTER’. 4. To set the minutes use the ‘-‘ & ‘+’ buttons. Confirm the minute digit by pressing ‘ENTER’. Repeat steps 1 to 4 to programme P2, P3 & P4. After programming P4 ‘OFF’ you automatically exit to the default display. At any time while programming the timer you can press the ‘PROGRAM’ button to exit to the default d

The radiator should only be operated on a flat stable surface. Operation IMPORTANT – Objects or clothing must not be placed on this heater. Before using the heater ensure that all warnings and instructions have been read carefully. To bring the heater into use plug it in. Neon indicating lights located at the controls area will glow when the appliance is plugged into the mains. Controls Thermostat (see Fig. 4) The Thermostat (see Fig. 4) controls the heat output according to the room temperature

Confirm the minute digit by pressing ‘ENTER’. 4. The timer now returns to the default display. 5. To reset incorrect time, repeat previous steps. Once the correct time is set, a total of four ON/OFF time programs can be set for operation. Setting Programmes Press the ‘PROGRAM’ key twice to set the programs. You are now setting the programs starting with P1 ‘ON’. SETTING P1 ON TIME: 1. To set the hour use the ‘-‘ & ‘+’ buttons. Confirm the hour digit by pressing ‘ENTER’. 2. To set the minutes use

. Repeat steps 1 to 4 to programme P2, P3 & P4. After programming P4 ‘OFF’ you automatically exit to the default display. At any time while programming the timer you can press the ‘PROGRAM’ button to exit to the default display. Note: If the ‘ON’ time is the same as the ‘OFF’ time the appliance will ignore the program. The Advance Function When in ‘AUTO’ MODE, if the ‘+’ button is pressed for longer than 2 seconds the programme will ADVANCE to the next setting programmed and will only revert bac

WARNING – THIS APPLIANCE MUST NOT BE USED IN A BATHROOM. WARNING - DO NOT USE THIS HEATER IN THE IMMEDIATE SURROUNDINGS OF A BATH, A SHOWER OR A SWIMMING POOL. WARNING – THIS HEATER MUST NOT BE LOCATED IMMEDIATELY BELOW A FIXED SOCKET OUTLET. DO NOT USE THE HEATER UNTIL THE FEET ARE FITTED CORRECTLY. FOLLOW these instructions carefully. NEVER cover or obstruct in any way the heat outlet slots at the top of the heater or the air inlet slots in the base of the heater. The heater carries the Warnin

This is quite normal – the fumes are non-toxic and will quickly disappear. We recommend that you open a window to ventilate the room when using the heater for the first time. Controls Thermostat -see Fig. 3 The thermostat controls the heat output according to the room temperature. Fig. 3 This ensures that the heater will not produce heat unnecessarily when the room is warm. To set the temperature you require, turn the thermostat knob clockwise until the desired temperature is reached. Alternativ

Electrical connection WARNING – THIS APPLIANCE MUST BE EARTHED This heater must be used on an ~ supply only and the voltage marked on the heater must correspond to the supply voltage. This heater is fitted with a rewireable plug incorporating a 13 amp fuse. In the event of replacing the fuse in the plug supplied, a 13 amp fuse approved by ASTA to BS 1362 must be used. If any other type of plug is used, a 15 amp fuse must be fitted in the plug, the adaptor, or at the distribution board. IMPORTANT