4 List of Figures ............................................................................................................................................... 10 List of Tables ................................................................................................................................................ 12 About this guide ........................................................................................................................................... 13 Audience....

Verify that the proper voltage is present before plugging the power cord into the receptacle. Failure to do so could result in equipment damage. 3. Verify that the AC power cord included with your IPLink router is compatible with local standards. If it is not, refer to chapter 13, “Contacting Patton for assistance” on page 112 to find out how to replace it with a compatible power cord. 4. Connect the male end of the power cord to an appropriate power outlet. 5. Verify that the green Power LED is

122 Ethernet Cable ....................................................................................................................................................123 Adapter................................................................................................................................................................123 D IPLink Physical Connectors ....................................................................................................................... 124 RJ-45

Connect the SmartNode to the network............................................................................................................42 3. Load configuration............................................................................................................................................42 Bootloader.............................................................................................................................................................43 Start Bootloader ..

Ensure that your site is properly prepared before beginning installation. Before installing the gateway router device, the following tasks should be completed: •Create a network diagram (see section “Network information” on page 30) •Gather IP related information (see section “IP related information” on page 30 for more information) •Install the hardware and software needed to configure the SmartNode. (See section “Software tools” on page 30) •Verify power source reliability (see section “Power