Votos - 3, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Royal Sovereign RSH-1650 |
Resumen del manual
d I L RSH Series RSR Series RSS Series LCD Display 1. READY -When the preset temperature is reached. 2. WAIT - Blinks until preset temperature is reached. 3. STND-BY - When STND-BY button is manually pressed or if the machine has been standing idle for 2 hours . In this mode , the temperature will automatically reset to 176°F (80°C).After another hour,Power will automatically shut off. 4. UPPER TEMPERATURE - Displays upper roller set temperature. 5. LOWER TEMPERATURE - Displays lower roller set temperature. 6. SPEED - Displays set speed. 7. PRGM - Displays set memory. [TOîlhW»l=W UPPER TEMPERATURE ¿53 LOWER TEMPERATURE 3 ¿S3 6 ^RS Sovereign Control Buttons - PROGRAMMING BUTTON - LOWER ^ (memory)- C/HOT ^ T-CHECK) ( ST/BY ) V J nDCDATIIII' Din ' U 1. UPPER: To change upper roller temperature by pressing button, then up or down arrow. (range 32~320°F or 0~160°C) 2. LOWER: To change lower roller temperature by pressing button, then up or down arrow. (range 32~320°F or 0~160°C) 3. SPEED: To change speed of the rollers by pressing button, then up or down arrow. (range 1 through 9) 4. MEMORY: To recall or change presets. To recall the settings, press MEMORY then up or down arrow. To save the settings, set desired temperatures and speeds then press the MEMORY button twice. (stores up to 9 different settings) 5. C/HOT: To change the mode from hot to cold or cold to hot lamination. In cold mode, the speed defaults to 2 (speed 1-4 settings) and stand-by function is disabled. 6. T-CHECK: To check current upper and lower roller temperatures.Display automatically returns to the previous settings after 5 blinks. 7. ST/BY: To change to stand-by mode (temperature will automatically reset to 176°F (80°C). While in this mode, all the buttons on the control panel are disabled. Press ST/BY mode button to resume normal operation. NOTE: Auto stand bv mode and auto power off mode -Stand bv mode:If no activity is made within 2 hours after each use the machine will automatically switch into stand bv mode. -Auto power off mode: If the machine is in stand bv mode and no activity is made for 60 minutes the machine will automatically power off. -If anv activity is made while in stand bv or auto power off mode the machine will return to it's previous stage. 8. REV: To reverse the rollers. Must press and hold the button to activate. 9. STOP: To stop the rollers from turning. 10. RUN: To start the rollers . 11. RESET : To reset the substrate and length counters (Excluding RSR/ RSS series). Press and hold RESET button for 2 seconds. 12. FAN: To activate the cooling fans. 13. MEAS: To display the substrate and length counters (Excluding RSR/RSS series). Press button again to return to previous screen. 7 RSS, RSR, RSH Series 7. SPEED AND TEMPERATURE SETTINGS Speed (Ft/min, M/min) SPEED# RSS-1050/685 RSS-1050N/685N RSR-1050/685 RSH-1650/1050 1 3.3(1.0) 2.6(0.8) 1.3(0.4) 2 4.6(1.4) 3.9(1.2) 1.9(0.6) 3 5.9(1.8) 5.2(1.6) 2.6(0.8) 4 7.2(2.2) 6.6(2.0) 3.3(1.0) 5 8.8(2.7) 7.9(2.4) 3.9(1.2) 6 10.5(3.2) 9.2(2.8) 4.6(1.4) 7 13.1(4.0) 10.5(3.2) 5.2(1.6) 8 16.4(5.0) 11.8(3.6) 5.9(1.8) 9 19.7(6.0) 13.1(4.0) 6.6(2.0) 8. ROLLER NIP SETTING No. Inches Metric (mm) 1 Lamination Lamination 2 1/25" 1 3 3/16-1/4" 5-7 4 3/8 -1/2" 10-13 RSH Series Only 3/5" 15 1 2 3 NOTE: If vou don't want to laminate.please place the pressure lever to the "Open positionfNQ.5Y'. 8 ¿RSSä&dgn 9. USING FOOT PEDAL AND REMOTE CONTROL USING FOOT PEDAL Place the foot pedal on the ...
Otros modelos de este manual:Laminador - RSH Series (708.46 kb)
Laminador - RSR Series (708.46 kb)
Laminador - RSR-1050 (708.46 kb)
Laminador - RSS Series (708.46 kb)