Votos - 5, Puntuación media: 4.4
(
)
)
|
Resumen del manual
The albums would play in the order , , , .1 2 3 4 Prefix with 3-digit numbers in the order you want to play Extension Starting play from an album (album skip) Remote control only Select the album with [ / ALBUM] or [ALBUM / ]. Playing only an album Remote control only You can play ( ) or repeat play ( ) tracks only in the selected album. Press [PLAY MODE] before or during playback to select the desired mode. off (no indication) • You can select another album with album skip. • You cannot use random play with MP3. Listening to tapes This unit is suitable for playing normal tapes, but high and metal position To stop play tapes will not be played to their full potential. Press [ / STOP/EJECT]. (Unit is switched off.) 1 234 To pause Press [ PAUSE ] during playback. To resume, press [ PAUSE ]. To rewind/ fast-forward Press [ REW/REV] (to rewind) or [ FF/CUE ] (to fast-forward) in the stop mode. To find a particular spot Press [ REW/REV] (to search backward) or [ FF/CUE] (to search forward) during playback. Play is resumed when the button is released. Note • The unit is on in the pause mode. Stop tape to turn the unit off by 1 Press [TAPE/OFF]. pressing [ / STOP/EJECT ] when leaving the unit. 0 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa0 • Do not press [ PLAY] when rewinding or fast-forwarding, as this 2 Press [ / STOP/EJECT ] to Exposed tape facing may jam the tape. open the deck and load a cassette. upward Be sure to press [ / STOP/EJECT ] before the next operation. Close deck by hand. • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. • Tape slack can get caught up in the mechanism and should be taken Side to be played up before the tape is played. facing you • Endless tapes can get caught up in the deck’s moving parts if used 0 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa0 incorrectly. 3 Press [ PLAY ] to start play. • Sound quality may be effected and the cassette tape may become Unit comes on and play starts. stuck if you do not adhere to the following. -Do not use other stickers not included with the cassette tape. 0 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaa0 -Place stickers on the cassette tape only as indicated. 4 Adjust the volume. Full auto-stop The automatic stop system will release the buttons when the tape reaches the end during play, recording, fast-forwarding or rewinding. 8 RQTT0585 RQTT0585 9 Recording You can record radio broadcasts or CDs. Before recording • This unit is suitable for recording normal tapes, but it cannot record onto high and metal position tapes to their full potential and prior recordings will not be erased correctly. • The recording level is set automatically. • Take up the leader tape before proceeding. 1 Press [ / STOP/EJECT ] to open the deck and load a cassette. Close deck by hand. a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a 2 Select the source to be recorded. When recording radio broadcasts Tune in the station. (Perform steps 1–3 of “Normal tuning” on page 6.) When recording CDs Insert the CD to be recorded. (Perform steps 1 and 2 of “Normal play” on page 7.) Press [CD / ] and then [ ] to switch to CD mode. If you want to record programmed tracks, program desired tracks before proceeding to step 3. a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a 3 Press [ ] to start recording. [ PLAY ] is also depressed with [ ]. Recording starts (one side only). The CD also starts playing if in CD mode. 1 3 Leader tape (Recording cannot be made.) Exposed tape facing upward Side to be recorded facing you To stop recording Press [ / STOP/EJECT ]. (The CD does not stop.) To stop recording temporarily Press [ PAUSE ]. (The CD does not stop.) Press once again to resume recording. To record on the other side of the cassette Turn the cassette over and press [ ]. If the CD finishes before the cassette Recording continues. Press [ / STOP/EJECT ] to stop it. If the cassette finishes before the CD The CD continues playing. Press [ ] to stop it. Erase protection Use a screwdriver or similar object to break out the tab. To re-record on a protected cassette Cover the hole with adhesive tape. To erase a tape 1. Press [TAPE/OFF]. 2. Insert the cassette with the side to be erased facing towards you and the exposed tape facing up. 3. Press [ ]. [ PLAY ] is depressed at the same time. Note • Noise may be recorded if this unit is near a TV. Keep the units at least 1.5 meters apart. • Changes to volume and sound quality do not affect recording. • To prevent interruptions to recording, make sure there is constant AC power supply to the unit or replace the batteries. • While recording you cannot perform the following operations. - Switching play of the source (CD, Radio, Tape) - Switching the radio AM/FM frequency - CD skipping, searching Setting the time This is a 12-hour clock. 1 Press [TUNER/BAND –AUTO PRESET] to turn the unit on. You can also use [CD / ], [ PLAY] to turn the unit on. a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a Remote control only 2 Pre...