• To stop a started timer recording, press the STOP/EJECT button on the VCR. • If the power fails for more than one minute, programmed timer recordings may be lost. Reset the clock before resetting the timer recordings. • If you are using a Cable Box/DBS, timer recordings are programmed differently. See page eight for details. See page 54 for more hints. VRZ342comb.QX33 4/7/99 10:06 PM Page 44 44 Rerecording (Tape Duplication) 1. Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2

If the remote control doesn’t operate your TV now, follow the steps below. 1 Point the remote control at your TV and press the TV button. Then, press the POWER button. If your TV turns on or off, try the other TV buttons (see pages 20 - 21). If your TV doesn’t turn on or off, or if the other buttons don’t work, go to step 2. 2 Find the brand of your TV on the list below, and remember the two-digit number beside it. 1&6 2 1&6 2 Find your TV code. 4 5 3 REW PLAY POWER VCR PLUS+ /ENTER SPEED VCR TI

. . . . . . . . . . .27 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 Basic Operations Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Recording . . . . . . . . . . . . . . . . . . . . . . . . . . .

If – – : – – appears on the display panel after you turn off the VCR, the VCR could not find the time. Use a different method to set the clock. • When the power plug is connected to an AC outlet, the correct time will appear on the display panel of the VCR when the power is off. • Press the EXIT/STATUS button repeatedly to make the time appear on the display panel when the VCR power is on. Helpful Hints 16 Setting the Clock (cont’d) Manual PBS Channel Selection 7 VCRTV VCR/TV QUICK PROGRAMMING P

You must select channels at the Cable Box. 3. Use a second RF OUT IN 75WANT /CABLE ANTENNA IN Jack Back of TV (example only) 1. Connect the Cable signal to the IN Jack on the Cable Box. coaxial cable to con- nect the ANT(enna) OUT jack on the VCP to the TV’s ANTENNA IN Jack. 2. Use the RF coaxial cable (supplied) to connect the OUT Jack on the Cable Box to the ANT(enna) IN Jack on the VCP. Watching TV with the VCP Off 1 Set the TV to the Cable Box output channel (channel 3 or 4). 2 Select the ch

• Always unplug the car battery cord from the cigarette lighter jack before you unplug it from the VCP. • You must disconnect the car battery cord from the VCP before you can use standard AC electrical power. • If the vehicle’s engine is off, there will not be enough electrical voltage to operate the VCP. • Unplug the car battery cord from the cigarette lighter jack when you have finished using the VCP. 12 Remote Control Buttons EJECT Button Press to eject the tape. POWER Button Press to turn th

To get stereo sound, use the connections on pages six-seven and select the channel to be viewed at the TV (with the VCR turned off). 22 Front Panel F.FWD (Fast Forward) Button When playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 35. Press to select an item in the VCR menu. PAUSE Button POWER Button Press to turn the VCR power on and off. VCR/TV Button Press to select

Tuner reception 1 Adjust the source selector to FM or AM. 2 Turn TUNING to tune to a station. • For FM, pull out the telescopic antenna. Incline and turn the antenna. Reduce its length if the signal is too strong (very close to a transmitter). • For AM, the set is provided with a built-in antenna so the telescopic antenna is not needed. Direct the antenna by turning the whole set. 3 To switch off the radio, adjust the source selector to OFF position. CD player Display indication for CD functions

Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. • Always shut the CD door to keep the CD compartment dust-free.To clean, dust the compartment with a soft dry cloth. • To take a CD out of its box, press the center spindle while lifting the CD.Always pick up the CD by the edge and replace the CD back in its box after use to avoid scratching and dust. • To clean the CD, wipe in a straight line from the center