This item and the information contained herein are the property of Tandberg Data. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the express written permission of Tandberg Data ASA, Kjelsasveien 161, P.O.Box 134 Kjelsas, N-0411 Oslo, Norway. DISCLAIMER Tandberg Data makes no repres

FlashIt also guides you in locating microcode files and gives you an indication of which microcode files can be used to upgrade the selected device. FlashIt comes in separate versions for DOS, Windows 95/98/ME and Windows NT/2000/2003/XP. Note: For more information, please see the User Guide available on the select SUPPORT, [Product], Software 5.8.2 TDkit – Tool for Testing and Downloading Firmware TDkit is a program that can be used to inspect and change some of the tape drives parameters and t

If a SCSI-ID conflict exists, some of the SCSI devices will not be recognized by your system. In many systems it is common to use the SCSI-bus for the hard-drive and CD-ROM, as well as the tape drive. Remember that the SCSI Controller uses SCSI-ID 7. 3.8.1 SCSI-ID Selection Tandberg LTO HH Internal Tape Drive The SCSI-ID on the Tandberg LTO HH is set by jumpers. From the table below, you can “read out” which SCSI-ID the device has been set up for. All SCSI device ID's are displayed on the screen

Minor corrections 17-Aug-07 WAJo All Added in LTO-3HH (820LTO) and using Tandberg LTO HH where all three products are covered. Trademarks LTO™ is a registered trademark of International Business Machines, Hewlett-Packard and Certance. Windows 2000/2003/XP, Windows 95, Windows 98, MS-DOS, Windows are registered trademarks of Microsoft Corporation in the United States. All other trademarks are registered marks of their respective owners. This publication may describe designs for which patents are