Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Keep Bystanders AwayKeep all bystanders at least 50 ft. (15 m) away. RicochetThrown objects can ricochet and result in personal injury or property damage. No BladeDo not install or use any type of blade on a product displaying this symbol. Blade ThrustBeware of blade thrust. Products authorized for blade use will display this symbol to warn of blade thrust. Gasoline and OilUse unleaded gasoline intended for motor vehicle use with an octane rating of 87 ([R + M] / 2) or higher. This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2- cycle oil. 50' 15m 50' 15m SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOLSIGNALMEANING DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE DEALER for repair. When servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to operate this product until you read thoroughly and understand completely the operator's manual. Save this operator's manual and review frequently for continuing safe operation and instructing others who may use this product. WARNING: The operation of any product can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1. SAVE THESE INSTRUCTIONS SPECIFICATIONS Weight - (without fuel) Trimlite (UT20004, UT20005)9.6 lbs. (4.4 kg.) Trim ‘n Edge (UT20024, UT20025)10 lbs. (4.5 kg.) Easy Reach (UT20044, UT20045)10.6 lbs. (4.8 kg.) String cutting width17 in. (432 mm) Engine displacement25cc String diameter.080 in. (2.0 mm) FEATURES UNPACKING INSTRUCTIONS nCarefully remove the product from the carton. nInspect the product to make sure no breakage or damage occurred during shipping. nDo not discard the packing material until you have inspected and operated the product. nIf any parts are damaged or missing, please call 1-800-242-4672 for assistance. WARNING: If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. PACKING LIST nTrimmer Assembly nOwner’s Kit nFront handle nCurved Shaft Grass deflector nEdger Guide - Trim ‘n Edge nHardware Bags (2) - Trimlite and Easy Reach nHardware Bags (3) - Trim ‘n Edge nBottle of 2-Cycle Oil nOperator's manual FEATURES FEATURES Trimlite model UT20004, UT20005 STOP BUTTON STARTER GRIP FRONT HANDLE PRIMER BULB REAR HANDLE DRIVE SHAFT HOUSING THROTTLE TRIGGER CURVED SHAFT GRASS DEFLECTOR STRING HEAD Fig. 1a FEATURES Trim ‘n Edge model UT20024, UT20025 STARTER GRIP STOP BUTTON FRONT HANDLE PRIMER BULB REAR HANDLE THROTTLE TRIGGER DRIVE SHAFT HOUSING CURVED SHAFT GRASS DEFLECTOR EDGER ATTACHMENT (TRIM ‘N EDGE ONLY) STRING HEAD Fig. 1b Easy Reach models UT20044, UT20045 STOP BUTTON STARTER GRIP PRIMER BULB FRONT HANDLE REAR HANDLE THROTTLE TRIGGER DRIVE SHAFT HOUSING STRAIGHT SHAFT GRASS DEFLECTOR STRING HEAD Fig. 1c ASSEMBLY If your unit has been preassembled, check each step to make sure the unit has been properly assembled. FRONT HANDLE See Figure 2. n Remove the front handle, bolt, and wing nut from the Owner’s Kit. nInstall the front handle onto the top side of the drive shaft housing and move it to a comfortable position. nPlace the bolt through the front handle as shown, then install the wing nut. nTighten wing nut securely. CURVED SHAFT GRASS DEFLECTOR WITHOUT EDGER GUIDE - TRIMLITE AND TRIM ‘N EDGE See Figure 3. nRemove wing nut, flat washer, lock washer, and bolt from the Owner’s Kit. nPlace curved shaft grass deflector over shaft and bracket. nInstall bolt through the slots in the tabs on grass deflector and bracket on shaft housing. nInstall flat washer, lock washer and wing nut. nTighten Securely. CURVED SHAFT GRASS DEFLECTOR WITH EDGER GUIDE - TRIM ‘N EDGE ONLY EDGER GUIDE ASSEMBLY See Figure 4. nAssemble the two plastic pieces of the edger guide together using the short bolt, flat washer, lock washer and wing nut. nSlide the edger guide to adjust it to the desired trimming length. nTighten the wing nut securely. FRONT HANDLE WING NUT BOLT Fig. 2 BOLT GRASS D...
Otros modelos de este manual:Clippers - UT20004 (1.96 mb)
Clippers - UT20024 (1.96 mb)
Clippers - UT20025 (1.96 mb)
Clippers - UT20044 (1.96 mb)