Votos - 4, Puntuación media: 4 ( )

Fabricar: Campbell Hausfeld Tamaño del archivo: 1.55 mb Nombre del archivo: bb107a2d-f2a6-4855-af06-553be42faa13.pdf Idioma del manual:

• Use only cleaning fluids specifically recom- mended for high pressure washers. Follow manufacturers recommendations. Do not use chlorine bleach or any other corrosive compound. • Some cleaning fluids contain substances which could cause injury to skin, eyes, or lungs. HAZARD RISK TO FLUID INJECTION HOW TO PREVENT IT WHAT CAN HAPPEN • Your washer operates at fluid pressures and velocities high enough to penetrate human and animal flesh, which could result in amputation or other serious injury. Leaks caused by loose fittings or worn or damaged hoses can result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE CUT! See a physician immediately! • Never place hands in front of nozzle. • Direct spray away from self and others. • Make sure hose and fittings are tightened and in good condition. Never hold onto the hose or fittings during operation. • Do not allow hose to contact muffler. • Never attach or remove wand or hose fittings while system is pressurized. • Injuries can result if system pressure is not reduced before attempting maintenance or disassembly. • To relieve system pressure, shut off engine, turn off water supply, and pull gun trigger until water stops flowing. • Use only hoses and accessories rated for pressure higher than your pressure washer's PSI. HAZARD RISK OF CHEMICAL BURN HOW TO PREVENT IT WHAT CAN HAPPEN • Use of acids, toxic or corrosive chemicals, poisons, insecticides, or any kind of flammable solvent with this product could result in serious injury or death. • Do not use acids, gasoline, kerosene, or any other flammable materials in this product. Use only household detergents, cleaners and degreasers recommended for use in pressure washers. • Wear protective clothing to protect eyes and skin from contact with sprayed materials. HAZARD RISK OF ELECTRICAL SHOCK HOW TO PREVENT IT WHAT CAN HAPPEN • Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock. • Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches. HAZARD RISK OF ELECTRICAL SHOCKRISK OF ELECTRICAL SHOCKRISK OF HOT SURFACES HOW TO PREVENT IT WHAT CAN HAPPEN • Contact with hot surfaces, such as engines exhaust components, could result in serious burn. • During operation, touch only the control surfaces of the pressure washer. Keep children away from the pressure washer at all times. They may not be able to recognize the hazards of this product. HAZARD RISK OF INJURY OR PROPERTY DAMAGE WHEN TRANSPORTING OR STORING HOW TO PREVENT IT WHAT CAN HAPPEN • Fuel or oil can leak or spill and could result in fire or breathing hazard, serious injury or death can result. Fuel or oil leaks will damage carpet, paint or other surfaces in vehicles or trailers. • If pressure washer is equipped with a fuel shut-off valve, turn the valve to the off position before transporting to avoid fuel leaks. If pressure washer is not equipped with a fuel shut-off valve, drain the fuel from tank before transporting. Only transport fuel in an OSHA approved container. Always place pressure washer on a protective mat when transporting to protect against damage to vehicle from leaks. Remove pressure washer from vehicle immediately upon arrival at your destination. HAZARD RISK OF UNSAFE OPERATION HOW TO PREVENT IT WHAT CAN HAPPEN • Unsafe operation of your pressure washer could lead to serious injury or death to you or others. • Do not use chlorine bleach or any other corrosive compound. • Become familiar with the operation and controls of the pressure washer. • Keep operating area clear of all persons, pets, and obstacles. • Do not operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times. • Never defeat the safety features of this product. • Do not operate machine with missing, broken, or unauthorized parts. • Never leave wand unattended while unit is running. • If engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure. Pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury. • If proper starting procedure is not followed, engine can kickback causing serious hand and arm injury. • The spray gun/wand is a powerful clean- ing tool that could look like a toy to a child. • Keep children away from the pressure washer at all times. • Do not overreach or stand on an unstable support. • Do not use pressure washer while standing on a ladder. • Grip gun/wand firmly with both hands. Expect the gun to kickback when triggered. • Reactive force of spray will cause gun/ wand to kickback, and could cause the op...

Descargar ahora

Introduzca dos números de la imagen: