Si lo hace podria danar permanentemente su monitor. 10 Informacion Tecnica Especificaciones Tecnicas Nota: Las Especificaciones de Producto son sujeto a cambio sin aviso. 17.0” TFT Tratamiento para superficies reflectantes En conformidad con Energy Star Compatible con VESA DPMS compatible < 1 W WXGA maximo 1440 x 900. Frecuencia Vertical maxima 75Hz. 0.255 x 0.255 mm 16.2M (6 bits+FRC) colors 0°~20° 367.2 mm x 229.5 mm Funcionando: 0°C ~ +40°C Almacenado: -20°C ~ + 60°C Voltaje de entrada AC100-

Ajuste del imagen (Image Adjust) : Ajusta la posicion Horizontal/Vertial, Tamano H, Ajuste Fino y Nitidez. Posicion H./V. (H./V. Position) : Para ajustar la posicion horizontal y vertical del video. Posicion H : V : mueve la pantalla a la derecha, W : mueve la pantalla a la izquierda. Posicion V : .. : mueve la pantalla hacia arriba, W : mueve la pantalla hacia abajo. 8 Tamano H. (H. Size) : Ajusta la anchura. W : disminuye la anchura de la imagen en pantalla, V : aumenta la anchura de la imagen

Warnings • Do not use any solvents or cleaning materials when cleaning the video Monitor. • Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. • Before putting on headphones always adjust the volume setting to the lowest position. • Do not put pressure on the screen. • Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Table of Contents A.Introduction...........

Some of the steps that may be required are: A) Removal of the vehicle's dome light B) If the trim ring will be used, it may have to be trimmed to fit the contour of the vehicle's headliner. Refer to the "Trim Ring Installation" section in this manual. TRIM RING INSTALLATION: Note: This page only covers special installation considerations for thick trim ring installation. If the video monitor is to be installed in a vehicle with the thick trim ring, it may need to be trimmed to fit the contour of

NOTE “ “ icon in front of a file name indicates that this is a folder, not an MP3 file. “MP3” icon in front of a file name indicates that this is a MP3 file. 18 19 2. Connecting to a Game or Camcorder (Refer to Figure 4) a. Set the AV In/Out Switch to the “In” Position. b. Connect one end of the audio/video cable’s black (1/8” plug) plug into the unit’s DVD AV jack and connect the other end to the AUDIO Output jacks on your Camcorder or other DVD using the AV adapter cable (white = left audio ch

*Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key. Missing one of the primary colors (RED, GREEN, or BLUE) *Inspect the monitor’s video cable and make sure that none of the pins are bent. INSTALLATION INSTRUCTIONS SWIVEL BASE To attach the swivel base to the monitor, do the following: . Carefully turn the monitor on its side or upside down. (see figure 1) . Locate

Auto Adjust button / Exit 2. / Contrast 3. Power Button/ LED 4. / Brightness 5. MENU / ENTER 9 FRONT PANEL CONTROL . Power Button: Press this button to turn the monitor ON or OFF. . Power Indicator: Blue — Power On mode. Orange — Off mode. . MENU / ENTER : Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Brightness /Contrast Adjust OSD status. . Brightness : Adjust brightness or function adjust. . Contrast : Adjust contrast or

The "H" stands for the horizontal frequency and "V" for the vertical frequency. 4. To exit and save, select the exit function, or leave the monitor alone for 10 seconds. If you want to adjust any other function, repeat steps 2-4. 8 J SPECIFICATION CRT 38.1cm(15"), 90. deflection, 29mm neck, 0.24mm(H), 0.28mm(D) dot pitch Viewable Image Size 35.1cm (13.8"), diagonal Video 0.7Vpp, R, G, B Analog Separate Sync. TTL Level H/V-sync.: Positive/Negative Scanning Frequency: Horizontal 30kHz to 56kHz aut

-9 128-6423 9 of 16 Operation Overhead Dome Lights The lights integrated into the VOH703 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times and the auto position will allow the lights to turn on and off with the vehicle’s interior lighting. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery.