PROBE CHILLING INDICATOR LED 5B. TIMED CHILLING INDICATOR LED 6. CYCLE START / STOP 7. INCREASE VALUE 8. DECREASE VALUE 9. RECIPE PROGRAMS (CHILLING CYCLES) 10. HACCP AND PRINTER (OPTIONAL) 11. DEFROSTING / FORCED VENTILATION 12. CHILLING / FREEZING CYCLE INDICATOR LED 13. STORAGE INDICATOR LED 14. TIME DISPLAY 15. TEMPERATURE DISPLAY ..C HACCP PROGRAM 0.. +38.. HARD +38.. 4.1 PUSH-BUTTONS : 1. ON /OFF (STAND BY) 2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C) 3. HARD BLAST CHILLING CYCLE (+38°F / +

STORAGE INDICATOR LED 14. TIME DISPLAY 15. TEMPERATURE DISPLAY ..CHACCPPROGRAM5. PROGRAMMING AND OPERATING INSTRUCTIONS The information and instructions given in this section address all persons operating the appli- ance: the user, the maintenance technician and non-specialised personnel. Ensure that the electrical power to the sys- tem has been disconnected before carryingout any cleaning or maintenance work on theappliance. 8.1 GENERAL SAFETY REGULATIONS Recall the following regulations to ens

Display/Led: Alternates message “ALL 08” with standard display Reset: Press the mute push-button (with beeper off ). Alternatively, switch off the panel then turn it back on (stand-by). Input Ht1 alarm (ALL 09) (Input in voltage 1 ... fuses). Input Ht2 alarm (ALL 10) (Input in voltage 2 ... fuses) Excessive temperature alarm (ALL 11) Cause: (only during storage) cell probe constantly detects a temperature greater than the sum of positive or negative storage set points with relative alarm delta.

2. INSTALLATION 2.1 Data plate information • Check that the data specified on the plate correspond to the characteristics of the power supply (V, kW, Hz, no. phases and power available). • The dataplate with appliance specifications is located at the rear exterior of the machine and/or on the electrical boards (fig. 3). The setup of individual units and the installation of condensers are subject to the fire-safety regulations of the country in which the machine is installed; seek all necessary a

Blast Chillers/Shock Freezers Effective Date August 2006 IMPORTANTINFORMATION READBEFOREUSE PLEASESAVETHESEINSTRUCTIONS! CONTENTS 1. GENERAL DOCUMENTATION 1.1 General information page 5 1.2 Installation page 5 1.3 Transport and handling page 5 1.4 Unpacking - disposal of packaging materials page 5 1.5 General safety regulations page 6 2. INSTALLATION 2.1 Data plate information page 6 2.2 Positioning page 6 2.3 Ambient temperature and air circulation page 7 2.4 Electrical connections page 7 2.5 R

Item Quantity , CSI Section 11400 o AT O MODELS: □ ST4460N-12M □ ST4460N-18M Two section with doors Twelve pan capacity Two section with doors Eighteen pan capacity □ STD4460N-12M Two section with drawers Twelve pan capacity □ STD4460N-18M Two section with drawers Eighteen pan capacity Model ST4460N-18M 404A STANDARD FEATURES Patented air screen ensures product stays cold without drying it out All 4400 Series units are 100% front breathing, which allows the unit to be pushed aga

Overall height of caster assembly is 6.00” (15.2cm). Styling: Units are standard with 18-gauge stainless steel exterior. Laminate is an option available at no additional charge. Decal packages and canopies are also available. 980 S. Isabella Road Mt. Pleasant, MI 48858 Phone: 800-733-8948 Fax: 800-669-0619 Email: info@delfield.com Approval _________________ Date____________________ Model #__________ CSI Section 11400 Printed in the USA. 06/05 SSSPFW 980 S. Isabella Road Mt. Pleasant, MI 48858 Ph

A stainless steel access panel is located in bottom of tank, allowing complete access to the evaporator coil and fan package. On/Off switch is located on the operator side in a recessed panel with a hinged cover plate. Freezer tank maintains 0. to -5. temperature with lids closed for storage. Lid: Lids are constructed of stainless steel and are foamed with polyurethane insulation. The lid thickness is 3/4”. Lid handle shall be black, recessed ABS. Lids are removable without the use of tools. Lid

SPF-42W 42” length, freezer module, 34” height, 35” depth . SPF-52W 52” length, freezer module, 34” height, 35” depth . SPF-66W 66” length, freezer module, 34” height, 35” depth SPF-52W STANDARD FEATURES • 14-gauge stainless steel top standard • 34” counter height, 35” depth • 9’ long cord and plug are supplied standard • 18-gauge stainless steel exterior standard • Electrical: 120 volt, 60 cycle, single phase • R404A refrigerant • Removable sliding lids (two per unit) standard • Standard on 5”

In this way you can prevent children from locking themselves in when playing and thus endangering their lives. Please make sure that the pipelines of your fridgefreezer are not damaged before collection for environment-friendly disposal. If your new chest freezer is fitted with a lock, the key should not be kept within reach of children or in the vicinity of your freezer so that children cannot be locked inside the chest. Appliance Packaging Information All used materials are environmetally