Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
1 11 Press TAPE1-2 (or TAPE). • Cassette TAPE 1- Insert the playback tape to dub. • Cassette TAPE 2- Insert a blank tape to copy on. 2 22Press DUBB. DUBBING -Normal speed copying To stop recording, press STOP (x). Recording Basic Setting 1 11 Select a function you want to record except tape function. 2 22Open the cassette deck TAPE 2 and insert a blank cassette into the cassette compartment. Set the recording direction Recording from Radio, CD or Auxiliary source 1 11 Press REC/[] on the front panel or z/[] on the remote control. “REC” flashes and holds the cassette in pause mode. 2 22Press REC/[] on the front panel or z/[] on the remote control. The recording begins. To pause the recording Press REC/[] or z/[]. To Stop the recording Press STOP(x). CD to Tape Synchronized Recording The CD synchro recording function dubs a complete CD and programmed titles automatically into a cassette. 1 11 Press DVD button on the remote control. 2 22 Press CD SYNC. in stop mode. “REC” flashes and “CD SYNC” displays in the display window. 3 33 The synchronized recording is started automatically after about 7 seconds. Note NoteNote • If you wish to record from the desired track, select the desired track with . bb/BB > or ./> before commencing CD synchro recording. • You cannot change any mode during recording. OPERATION 23 MDD102_62_A0U_ENG_TASHKENT 3/16/07 9:07 AM Page 24 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power. The power is on, but the unit does not work. No picture. There is no sound or only a very low-level sound is heard. The playback picture is poor. The unit does not start playback. Severe hum or noise is heard. Radio stations cannot be tuned in. The remote control does not work properly. The disc tray is not opened Cause • The power cord is disconnected. • No disc is inserted. • The TV is not set to receive DVD signal out- put. • The video cable is not connected securely. • The connected TV power is turned off. • The equipment connected with the audio cable is not set to receive DVD signal output. • The audio cables are not connected securely. • The power of the equipment connected with the audio cable is turned off. • The audio connecting cord is damaged. • The disc is dirty. • An unplayable disc is inserted. • The disc is placed upside down. • The disc is not placed within the guide. • The disc is dirty. • A menu is on the TV screen. • The Rating level is set. • The plugs and jacks are dirty. • The disc is dirty. • The speakers and components are connected poorly. • The unit is located with too close to the TV. • The antenna is positioned or connected poorly. • The signal strength of the stations is too weak (when tuning in with automatic tuning). • No stations have been preset or preset sta- tions have been cleared (when tuning by scanning preset stations). • The remote control is not pointed at the remote sensor of the unit. • The remote control is too far from the unit. • There is an obstacle in the path of the remote control and the unit. • The batteries in the remote control are exhausted. • The DVD/ CD function is not selected. Correction • Plug the power cord into the wall outlet securely. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) • Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. • Connect the video cable into the jacks securely. • Turn on the TV. • Select the correct input mode of the audio so you can listen to the sound from the unit. • Connect the audio cable into the jacks securely. • Turn on the equipment connected with the audio cable. • Replace it with new one. • Clean the disc. • Insert a playable disc. (Check the disc type, color system and Regional code.) • Place the disc with the playback side down. • Place the disc on the disc tray correctly inside the guide. • Clean the disc. • Press the SETUP button to turn off the menu screen. • Cancel the Rating function or change the rat- ing level. • Wipe them with a cloth slightly moistened with alcohol. • Clean the disc. • Connect the speakers and components securely. • Move your TV away from the audio compo- nents. • Connect the antenna securely. • Adjust the antennas and connect an external antenna if necessary. • Tune in the station manually. • Preset the stations. • Point the remote control at the remote sensor of the unit. • Operate the remote control within about 23 ft (7 m). • Remove the obstacle. • Replace the batteries with new ones. • Select the DVD/ CD function by pressing DVD/ CD button. And then press the ZOPEN/CLOSE button. 24 MDD102_62_A0U_ENG_TASHKENT 3/16/07 9:07 AM Page 25 Language Code List Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 Malagasy 7771...