Votos - 5, Puntuación media: 4.2
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Click the [New] button to input the IP address and other information in Device Information .. when the devices connected are not displayed in Target Device List ... Click the [Apply] button to register the device, then click the [Save and Close] button to save the setting. When only one device is connected and the network setting is initialized, the communication is available if “192.168.0.128” (M7CL/LS9) or “192.168.0.129” (DSP5D) is set in Device Information ... When connecting to multiple devices, click the [Advanced Settings] button to enable the device to be detected automatically for convenient operation (page 8). .. Target Device List The name, IP address, MAC address, and MIDI port number of all devices registered to communicate with the DME-N Network Driver are shown in this list. Click the title bars to sort accordingly. When a device is selected in the list, information related to that device will appear in the device information area (..) below the list. Device Name This column lists the names of devices. When a device is selected in the list, it’s name also appears in the Device Name field in the device information area (..) below the list. Device IP Address The IP address of the corresponding device. When a device is selected in the list, it’s IP address also appears in the Device IP Address field in the device information area (..) below the list. Device MAC Address The MAC address of the corresponding device. When a device is selected in the list, it’s MAC address also appears in the Device MAC Address field in the device information area (..) below the list. Device Port No. The MIDI port number of the corresponding device. When a device is selected in the list, it’s MIDI port number also appears in the Device Port No. field in the device information area (..) below the list. [New] Button Click this button to add a new device to the list. Edit the device’s parameters as required via the fields in the device information area (..) below the list, then click the [Apply] button to add the specified device. [Duplicate] Button This button adds a device to the list by copying the data from the currently selected device. Edit the new device’s parameters as required via the fields in the device information area (..) below the list, then click the [Apply] button to add the specified device. .. .. .. DME-N Network Driver Installation Guide for M7CL/LS9/DSP5D 7 [Remove] Button Deletes the selected device from the list. If the removed device is not the lowest device in the list, all devices below the removed device will be shifted upward to maintain the continuity of the list. [Remove ALL] Button Deletes all devices from the list. [Undo] Button This button provides a one-step undo function that allows you to undo a single operation and revert to the previous state. The [Undo] button will be grayed out and inaccessible immediately after an undo operation or after the control panel is launched. .. Device Information When a device that is registered for communication with the DME-N Network Driver is selected in the Target Device List, the communication parameters for that device can be viewed and edited in the Device Information fields. Device Name This is the name of the device selected in the Target Device List. The initial default settings are “UNIT1” through “UNIT256,” but the name can be edited as required in the Device Name field. Device IP Address The IP address of the device selected in the Target Device List can be set via these fields. Refer to the manual of the corresponding device for details on checking and setting its IP address. NOTE The IP address must be set properly or communication with the device will not be possible. Device MAC Address The MAC (Media Access Control) address of the device can be set via these fields. The MAC address of each device is permanently assigned when the device is manufactured and cannot be changed. The MAC address parameter is included to prevent data from being sent to the wrong device if the IP address in inadvertently set incorrectly. Refer to the manual of the corresponding device for details on checking its MAC address. NOTE The MAC address must be set properly or communication with the device will not be possible. NOTE The MAC address of the connected device cannot be changed. Device Port No. The MIDI port number of the device selected in the Target Device List can be set via this menu. The MIDI port number also functions as device ID number. It should be set to “1” for M7CL/LS9/DSP5D. NOTE The MIDI port number must be set properly or...
Otros modelos de este manual:Instrumentos Musicales - DSP5D (713.21 kb)
Instrumentos Musicales - LS9-16 (713.21 kb)
Instrumentos Musicales - LS9-32 (713.21 kb)
Instrumentos Musicales - M7CL-48 (713.21 kb)