Votos - 1, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
When a device is selected in the list, it’s name also appears in the Device Name field in the device information area (..) below the list. Device IP Address The IP address of the corresponding device. When a device is selected in the list, it’s IP address also appears in the Device IP Address field in the device information area (..) below the list. Device MAC Address The MAC address of the corresponding device. When a device is selected in the list, it’s MAC address also appears in the Device MAC Address field in the device information area (..) below the list. Device Port No. The MIDI port number of the corresponding device. When a device is selected in the list, it’s MIDI port number also appears in the Device Port No. field in the device information area (..) below the list. [New] Button Click this button to add a new device to the list. Edit the device’s parameters as required via the fields in the device information area (..) below the list, then click the [Apply] button to add the specified device. [Duplicate] Button This button adds a device to the list by copying the data from the currently selected device. Edit the new device’s parameters as required via the fields in the device information area (..) below the list, then click the [Apply] button to add the specified device. .. .. .. DME-N Network Driver Installation Guide for M7CL/LS9/DSP5D 7 [Remove] Button Deletes the selected device from the list. If the removed device is not the lowest device in the list, all devices below the removed device will be shifted upward to maintain the continuity of the list. [Remove ALL] Button Deletes all devices from the list. [Undo] Button This button provides a one-step undo function that allows you to undo a single operation and revert to the previous state. The [Undo] button will be grayed out and inaccessible immediately after an undo operation or after the control panel is launched. .. Device Information When a device that is registered for communication with the DME-N Network Driver is selected in the Target Device List, the communication parameters for that device can be viewed and edited in the Device Information fields. Device Name This is the name of the device selected in the Target Device List. The initial default settings are “UNIT1” through “UNIT256,” but the name can be edited as required in the Device Name field. Device IP Address The IP address of the device selected in the Target Device List can be set via these fields. Refer to the manual of the corresponding device for details on checking and setting its IP address. NOTE The IP address must be set properly or communication with the device will not be possible. Device MAC Address The MAC (Media Access Control) address of the device can be set via these fields. The MAC address of each device is permanently assigned when the device is manufactured and cannot be changed. The MAC address parameter is included to prevent data from being sent to the wrong device if the IP address in inadvertently set incorrectly. Refer to the manual of the corresponding device for details on checking its MAC address. NOTE The MAC address must be set properly or communication with the device will not be possible. NOTE The MAC address of the connected device cannot be changed. Device Port No. The MIDI port number of the device selected in the Target Device List can be set via this menu. The MIDI port number also functions as device ID number. It should be set to “1” for M7CL/LS9/DSP5D. NOTE The MIDI port number must be set properly or communication with the device will not be possible. [Apply] Button Click the [Apply] button after editing the Device Name, Device IP Address, Device MAC Address, or Device Port No. parameters to actually apply the changes. Also, devices added to the Target Device List (..) by pressing the [New] or [Duplicate] buttons will only actually be registered for communication with the DME-N Network Driver when the [Apply] button is pressed. .. [Advanced Settings] Button Opens the “Advanced Settings” dialog box. This window provides access to advanced settings. For details refer to the “Advanced Setup” section. .. [Save and Close] Button Click the [Save and Close] button to close the “DME-N Network Driver” dialog box and save the settings.This button is not accessible while an application that is using the DME-N Network Driver is running. NOTE Click the [Cancel] button if you want to close the window without saving any changes. DME-N Network Driver Installation Guide for M7CL/LS9/DSP5D 8 Advanced Setup The “Advanced Settings” ...
Otros modelos de este manual:Instrumentos Musicales - LS9-16 (713.21 kb)
Instrumentos Musicales - LS9-32 (713.21 kb)
Instrumentos Musicales - M7CL-32 (713.21 kb)
Instrumentos Musicales - M7CL-48 (713.21 kb)