Votos - 1, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Enter a file name and click the [Save] button to save the setup file. TCP/IP Setting s Windows XP 1 Access the Control Panel. 2 If the control panel appears as category view, click [Switch to Classic View]. 3 Double-click [Network Connections] . [Local Area Connection]. The “Local Area Connection Status” dialog box will be displayed. NOTE If the “Local Area Connection properties” dialog box appears, skip ahead to step 5. 4 Click [Properties]. The “Local Area Connection Properties” dialog box will be displayed. 5 Select [Internet Protocol (TCP/IP)], then click [Properties]. The “Internet Protocol (TCP/IP) Properties” dialog box will be displayed. 6 Click [Use the following IP address]. 7 Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. NOTE When installing on the same subnet as the DME unit(s), set the gateway’s host address to 254. NOTE It is recommended that you set the IP address to “192.168.0.3” when peer-to-peer connecting a single device to a computer. For details on settings when connecting to multiple devices via a switching hub, refer to the installation guide for each editor software. 8 Click [OK]. 9 Restart your computer. DME-N Network Driver Installation Guide for M7CL/LS9/DSP5D Windows Vista / 7 / 8 1 Access the Control Panel, then click or double-click [Network and Sharing Center] or [View network status and tasks]. The “Network and Sharing Center” is displayed. 2 Click [Manage network connection] or [Change adapter settings] from the “Tasks” list located in the left side of “Network and Shareing Center” window, then double-click [Local Area Connection]. The “Local Area Connection Status” dialog box will be displayed. NOTE The “User Account Control” dialog box may appear. Click [Continue]. NOTE If the “Local Area Connection properties” dialog box appears, skip ahead to step 4. 3 Click [Properties]. The “Local Area Connection properties” dialog box will be displayed. NOTE The “User Account Control” dialog box may appear. Click [Continue]. 4 Select [Internet Protocol Version 4(TCP/IPv4)], then click [Properties]. The “Internet Protocol Version 4(TCP/IPv4) Protocol” dialog box will be displayed. 5 Click [Use the following IP address]. 6 Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway], and “255.255.255.0” into [Subnet mask]. NOTE When installing on the same subnet as the DME unit(s), set the gateway’s host address to 254. NOTE It is recommended that you set the IP address to “192.168.0.3” when peer-to-peer connecting a single device to a computer. For details on settings when connecting to multiple devices via a switching hub, refer to the installation guide for each editor software. 7 Click [OK]. DME-N Network Driver Installation Guide for M7CL/LS9/DSP5D Troubleshooting (FAQ) When controlling the device from your computer via Ethernet, the device does not operate correctly. • Is the Ethernet cable connected correctly? Refer to the “Connection of computer and device” section. • Is the DME-N Network Driver set up appropriately? Refer to the “Setup” section. • Did you enter an appropriate IP address of the device? For details on making settings of the IP Address of the devices, refer to the owner’s manual for each device. If you are connecting the device to your computer in a one-to-one connection, we recommend that you make the following initial settings. IP address 192.168.0.128 (M7CL/LS9), 192.168.0.129 (DSP5D) Gateway address 192.168.0.1 Subnet mask 255.255.255.0 Refer to the installation guide for each editor software when connecting to multiple devices with network switch. • Is the computer network setup appropriately? Confirm the network setup by following the procedures in the “TCP/IP Settings” section. If you are connecting the device to your computer in a one-to-one connection, we recommend that you make the following settings. IP address 192.168.0.3 Subnet mask 255.255.255.0 Default gateway 192.168.0.1 Refer to the installation guide for each editor software when connecting to multiple devices with network switch. • Are the settings of the device and peripheral network devices (including switching hubs) appropriate? Refer to the relevant owner’s manuals for the device and peripheral network devices (including switching hubs) for details. • Have you selected an appropriate ports in the Editor and Studio Manager? Select the device as the input/output port settings of Editor and Studio Manager. • Are you using the latest DME-N Net...
Otros modelos de este manual:Instrumentos Musicales - DSP5D (713.21 kb)
Instrumentos Musicales - LS9-16 (713.21 kb)
Instrumentos Musicales - LS9-32 (713.21 kb)
Instrumentos Musicales - M7CL-32 (713.21 kb)