Manual de usuario Yamaha, modelo M7CL-48
The bar graph display will change as follows according to the send position (pre/post) and on/off status of the signal sent from the MIX channel to the MATRIX buses. To switch a send on/off, click the channel number located at the left of the bar graph. 6 FPAN/BALANCE The PAN knob adjusts the panning of the signal that is sent from the mix channel to the STEREO bus L/R channels (or the L/C/R channels). You can set this to the center value 7 by holding down the (< >) key of your computer keyboard and clicking this 8 knob. If assigned as a stereo bus, this adjusts the balance of the odd-numbered channel and even-numbered channel. The stereo bus setting can be made in Mix Bus Setup of 9 the Mixer Setup dialogbox. J The [ST] button is an on/off switch for the signal that is sent from the mix channel to the STEREO bus. The [MONO] button is an on/off switch for the signal that is sent from the mix channel to the MONO bus. K If LCR MODE is selected in the Selected Channel window, the [LCR] button will appear instead of the [ST] button and [MONO] button, and the [LCR] button will be an on/off switch for the signal that is sent from the mix channel to the LCR bus. GVARI/FIXED Indicates the type (VARI or FIXED) of the currently selected MIX bus. This parameter can be switched in Mix Bus Setup of the Mixer Setup dialogbox. HSEL (Select) Selects the MIX channel for which you want to make settings. ICUE L This button cue-monitors the signal of the MIX channel. JON M Switches the MIX channel on/off. The button is color-coded and indicates status as follows: White: MIX channel is on (normal mode). Black: MIX channel/Send is off. Other colors: Send is on (SENDS ON FADER mode). KFader Adjusts the output level of the MIX channel. The current fader value is The numbers of mute groups shown in the numeric box immediately to which this channel belongs below the fader. You can set this to the are shown in red. minimum value (–. dB) by holding down the (< >) key of your computer keyboard and clicking the If this channel is set to Recall fader knob, or set it to the nominal value Safe, the R character is (0.00 dB) by holding down the shown in green. (< >) key and key and If this channel is set to Mute clicking the fader knob. Safe, the M character is shown in green. The numbers and alphabetical letters at the right of the fader indicate the mute groups to which that channel belongs, and show the Recall Safe and Mute Safe status of the channel. The fader is color-coded and indicates status as follows: White: You can adjust the input level of the MIX channel (normal mode). Gray: MIX channel is off. Other colors: You can adjust the send level (SENDS ON FADER mode). M7CL V3 Editor Owner’s Manual 23 LChannel number LChannel number >) key of your computer keyboard and double-click this, the Selected Channel window will open as an additional view. MChannel name This is a text box that displays the channel name. You can also edit the channel name in this text box. MATRIX window In this window you can view and edit the parameters of MATRIX channels 1–8. The parameters shown in the window can be selected from the [View] menu or the menu that appears when you right-click ( key + click) in the window. You can access this window in the following ways. . From the [Windows] menu, choose [Overview] and then choose “MATRIX” . Use the navigation keys in the Master window to turn on the [MTRX] button M7CL V3 Editor Owner’s Manual 24 1 1 3 4 5 6 7 8 9 J AMIX/CH/ST IN (Send levels from the MIX/INPUT CH/ST IN to the MATRIX bus) This switches between indicating the sends from MIX channels 1–16, the sends from INPUT CH 1–16 / 17–32 / 33–48 (*), and the sends from ST IN. The bar graphs located immediately below the button indicate/adjust the level of the signal that is sent from each channel to the MATRIX bus. The method of operation and the meaning of the display are the same as for (5) MATRIX in the MIX window (. p.23). (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. BSTEREO (Send levels from the STEREO channels to the MATRIX bus) Here you can view and edit the send levels of the signals sent from the STEREO channels to the MATRIX bus. While you drag the bar graph, the send level is shown in the numerical display area immediately below. The method of operation and the meaning of the display are the same as for (5) MATRIX in the MIX window (. p.23). CEQ (Equalizer) Switches the EQ on/off. The graph immediately below the button shows the approxi mate response of the EQ. This is the same as the equalizer for INPUT CH (. p.17). DDYN1(Dynamics 1) Switches the dynamics processor on/off. This is the same as the dynamics 2 for INPUT CH (. p.17). EINS (Insert) Enables/disables the insert-in. FSEL (Select) Selects the MATRIX channel for which you want to make settings. GCU...
)
