Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
If the CH button is on, the HA Recall Safe setting will not be linked. DCA group name Recall Safe and Selective Recall can be switched on/off A new WITH NAME button has been added to the DCA area of the RECALL SAFE screen and SELECTIVE RECALL screen. This allows you to exclude just the DCA group name from DCA group Recall Safe and Selective Recall. If the WITH NAME button is on, Recall Safe and Selective Recall will apply to the DCA group names of DCA groups for which these functions are on. If the WITH NAME button is off, DCA group names are excluded from Recall Safe and Selective Recall. PLUG-IN parameters added to Recall Safe and Selective Recall PLUG-IN parameters have been added to the RECALL SAFE screen and SELECTIVE RECALL screen. This is to support plug-in cards (such as Waves Y96K) that will become available in the future. EN MIDI EVENT etc. data now maintained during scene recall MIDI EVENT etc. data now maintained during scene recall DME series monitor source selection and EXTERNAL CUE on/ off A MONITOR button and monitor source select button have been added to the DME CONTROL screen. When you click the monitor source select button ( ), the MONITOR POINT SELECT window will appear, letting you select the DME series unit monitor source. If the MONITOR button is on, the EXTERNAL CUE indicator in the upper part of the display will turn on, and the monitor signal of the DME series unit will be sent to the PM5D’s CUE bus. Note Before turning on the MONITOR button, you must select the same port as the monitor output on the DME series unit and as the monitor input for the PM5D. To specify the DME series unit monitor output, use the “Monitor Out” dialog box of DME Designer, accessed by [Tools] menu >[Monitor]. To specify the PM5D monitor input, use the MONITOR PORT field on the SETUP page of the DME CONTROL screen. Newly added bulk dump data types The following data types can now be handled by bulk dump. Data name (D0) Data Number (D1,2) tx/rx Function ‘K’ 512 (Current Data) tx/rx Surround Setting & Request ‘V’ 512- (Current Data) tx/rx User Defined Keys & Request ‘L’ 512- (Current Data) tx/rx MIDI Remote & Request ‘U’ 512- (Current Data) tx/rx Fader Mode & Request SETUP data compatibility SETUP data created on system software V1.05 or later cannot be loaded into a system that’s running V1.03 or earlier. However, SETUP data created on system software V1.03 or earlier can be loaded by a system that’s running V1.05 or later. A note regarding scenes/libraries immediately after system startup After the system is started up, the PM5D takes several minutes to transfer scene/library data within internal memory. (The time required depends on the amount of data.) This means that the following restrictions apply during this time. • You can’t execute the PASTE button in the GLOBAL PASTE screen. • You can’t execute the scene memory UNDO function. • Scene memory recall will take a bit of time. U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha ...
Otros modelos de este manual:Instrumentos Musicales - PM5D-RH (114.14 kb)