IN MOST CASES, A BLACK & DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE. IF YOU HAVE A SUGGESTION OR COMMENT, GIVE US A CALL. YOUR FEEDBACK IS VITAL TO BLACK & DECKER. TO REDUCE THE RISK OF INJURY, THE USER MUST READAND UNDERSTAND THE INSTRUCTION MANUAL. SAVE THIS MANUAL FOR FUTURE REFERENCE. Cat. # CSL100MV Form # 90519934 June 2007 Copyright © 2007 Black & Decker Printed in China CSL100MV ManualEN 062007.qxp 9/26/08 11:22 AM Page 1 GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL

Wa s hhands after handling. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK: • Do not operate unit with damaged cord or plug; or if the unit has received a sharp blow, been dropped, or otherwise damaged in any way. • Do not open body casing. There are no user- s e rviceable parts inside; take it to a qualifieds e rvice technician when service or repair is required. Incorrect reassembly may result in arisk of electric shock or fire, and will void warranty. WARNING: FIRE HAZARD: Never contact combus

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 7.7” (195mm)10.23” (260mm) 7.28” (185mm) 8.60” (218.5mm) 8.05” (204.5mm) 4.25” (108mm) 1.57” (40mm) 7.7” (195mm)10.23” (260mm) 7.28” (185mm) 8.60” (218.5mm) 8.05” (204.5mm) 4.25” (108mm) 1.57” (40mm) 9.13” (232mm) 8.27” (210mm) Design LED 108IP Dimensions The Design LED 108IP (DLED 108IP) by Elation Professional is a high output, compact L.E.D. color changer featuring full RGB color mixing using 36 Luxeon K2 LED’s - 12 RED, 12 BLUE an

No. de tel_fono de ayuda a los clientes: 1-800-932-3188 ° Seguridad ° Funcionamiento • Mantenimiento Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visite la p_gina Web de Craftsman: 983000-003 2-02 _, ATENClON: Lea cuidadosamente todo este manual antes de usar su nueva luz de trabajo. Preste mucha atencibnalasReglaspara FuncionamientoSeguro,asfcomoalasAdvertenciasy Avisos. Se ha dado prioridad m_tximaa la seguridad, rendimientoy dependabilidaden el dise.=odeestaluzde tr

. • To reduce the risk of damage to charger body and cord, pull by charger plug rather than cord when disconnecting charger. • An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b. That extension cord is properly wired and in good electrical condition; and

Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1. SAVE THESE INSTRUCTIONS BATTERY PACK/CHARGER The battery pack and charger are not included with your worklight. They are both sold separately. When purchasing, use the following informat