Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
9. Place a washer and wing nut on the end of the long bolt that protrudes through the bottom of the toilet bowl. hardware 6482R-2 assembled 6482ER-2 assembled “R” on armrest socket locking button toilet seat riserarmrest right armrest shown installed (shown upside down) mounting holes 6482ER-2, one arm attached (shown upside down) boltwasherswingnut 6486R-2-INS-LAB-RevA11 10. Use a Phillips or blade screwdriver, whichever is appropriate, to turn the bolt clockwise until toilet seat riser and toilet seat lid are snug. Do not overtighten. 11. The toilet seat riser should now be securely installed on the toilet bowl. To ensure that you have a proper fit, intentionally shake the toilet seat riser to ensure proper placement and fit. The toilet seat riser should not move; if it does, re-install. OPERATION WARNING: Always ensure the toilet seat riser is securely installed before use. MAINTENANCE WARNING: Check the toilet seat riser weekly for signs of damage or cracking. If damage or cracking is found, DO NOT use the toilet seat riser. Contact your Lumex authorized distributor immediately. WARNING: Inspect the toilet seat riser weekly and tighten it as needed to ensure secure installation. s NOTICE: Never use abrasive cleaners or scouring pads on any part of the toilet seat riser. • To clean the toilet seat riser, wash it with soap and water or a mild detergent, then rinse it with water. Ensure the toilet seat riser is rinsed well before use. • To clean interior of toilet seat riser, flush with warm soapy water, then drain and allow to air dry for several hours. • If moisture accumulates inside toilet seat riser, do the following: a. Remove toilet seat riser from toilet bowl. b. Turn toilet seat riser upside down and tilt toward drain opening. c. Rotate until drain opening is facing downward and moisture drains. d. Allow toilet seat riser to air dr y for several hours before re-installation. WARRANTY GF Health Products, Inc. warrants the Lumex 6482R-2/6482ER-2 Toilet Seat Riser as follows: Lifetime limited warranty against manufacturer’s defects. If a product is deemed to be under warranty, GF Health Products, Inc. shall provide, at its option, (1) replacement of any defective part or product or (2) a credit of the original selling price made to GF Health Products, Inc.’s initial customer. The warranty does not include any labor charges incurred in replacement part(s) installation or any associated freight or shipping charges to GF Health Products, Inc. The warranties contained herein contain all the representations and warranties with respect to the subject matter of this document, and supersede all prior negotiations, agreements and understandings with respect thereto. The recipient of this document hereby acknowledges and represents that it has not relied on any representation, assertion, guarantee, warranty, collateral contract or other assurance, except those set out in this document. GF Health Products, Inc. is not responsible ...
Otros modelos de este manual:Baño - LUMEX 6482R-2 (111.76 kb)