Votos - 1, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
The battery inside the machine is a service component. Do not change it by yourself. There is risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to your local environmental guidelines. Don’t puncture or incinerate the battery. Checking replacablesIf you experience frequent paper jams or printing problems, check the number of pages the machine has printed or scanned. Replace the corresponding parts, if necessary. 1.Press Menu on the control panel. 2.Press the left/right arrow until System Setup appears and press OK. 3.Press the left/right arrow until Maintenance appears and press OK. 4.Press the left/right arrow until Supplies Life appears and press OK. 5.Press the left/right arrow until the item you want appears and press OK. •Supplies Info: Prints the supply information page. •Total: Displays the total number of pages printed. •ADF Scan: Displays the number of pages printed by using the ADF. •Platen Scan: Displays the number of pages scanned by using scanner glass. •Imaging Unit, Transfer Belt, Fuser, TransferRoller, Tray1 Roller: Displays the number of pages printed by each item. 6.If you selected to print a supply information page, press OK to confirm. 7.Press Stop/Clear to return to ready mode. Tips for moving & storing your machine•When moving the machine, do not tilt or turn it upside down. Otherwise, the inside of the machine may be contaminated by toner, which can cause damage to the machine or reduce print quality. •When moving the machine, make sure at least two people are holding the machine securely. Items Yield (Average) Fuser unit Approx. 50,000 black pages or 12,500 color pages Transfer roller Approx. 50,000 black pages or 12,500 color pages Transfer unit (ITB) Approx. 50,000 black pages or 12,500 color pages Pick-up roller Approx. 50,000 pages Troubleshooting_ 1 1.troubleshootingThis chapter gives helpful information for what to do if you encounter an error. This chapter includes: •Redistributing toner•Tips for avoiding paper jams•Clearing original document jams (CLX-3185FN/CLX-3185FW only) •Clearing paper jams•Understanding display messages•Solving other problems Redistributing tonerWhen the toner cartridge is near the end of its life, •White streaks or light printing occurs. •Prepare toner appears on the display. •The Status LED blinks red. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. 1.Using the handle, completely open the front door. 2.Grasp the handles on the toner cartridge and pull to remove the cartridge from the machine. 3.Thoroughly roll the cartridge five or six times to distribute the toner evenly inside the cartridge. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area. 4.Make sure that the color of the toner cartridge matches the color slot and then grasp the handles on the toner cartridge. Insert the cartridge until it clicks into place. 5.Close the front door. Make sure the door is securely latched. If the front door is not completely closed, the machine will not operate. Tips for avoiding paper jamsBy selecting the correct media types, most paper jams can be avoided. When a paper jam occurs, refer to the guidelines below: (See "Clearing paper jams" on page 2). •Ensure that the adjustable guides are positioned correctly (See "Loading Troubleshooting_ 2 paper in the tray" on page 4). •Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside of the tray. •Do not remove paper from the tray while your machine is printing. •Flex, fan, and straighten paper before loading. •Do not use creased, damp, or highly curled paper. •Do not mix paper types in a tray. •Use only recommended print media (See "Setting the paper size and type" on page 6). •Ensure that the recommended side of the print media is facing up in the tray. Clearing original document jams (CLX-3185FN/CLX-3185FW only) When an original document jams in the document feeder, a warning message appears on the display. To avoid tearing the document, remove the jammed document slowly and carefully. To prevent document jams, use the scanner glass for thick, thin or mixed paper-type originals. 1.Remove any remaining pages from the document feeder. 2.Open the document feeder cover. 3.Gently remove the jammed paper from the document feeder. If you see no paper in this area, go to step 5.4.Close the document feeder cover. Reload the pages you removed, if any, in the document feeder. 5.Open the scanner lid. 6.Seize the misfeed paper, and remove the paper from the feed area by carefully pulling it to the right using both hands. 7.Close the scanner lid. Load the removed pages back i...
Otros modelos de este manual:Impresoras - CLX-3180K (13.97 mb)
Impresoras - CLX-3185 (13.97 mb)
Impresoras - CLX-3185FN (13.97 mb)
Impresoras - CLX-3185FW (13.97 mb)