Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
You are now ready to use your new Samsung wireless printer on your network. TROUBLESHOOTING Solve problems that might occur during wireless setting and installing the machine driver. Wireless network problems If problems occur while using the machine on a network, check the followings. Printers Not Found •Your machine may not be turned on. Turn on your computer and the machine. •USB cable is not connected between your computer and machine. Connect machine to your computer using the USB cable. •The machine does not support wireless network. Check the machine's user's guide included on the software CD supplied with your machine and prepare a wireless network machine. Connecting Failure - Not found SSID •The machine is unable to search network name (SSID) which you have selected or typed in. Check the network name (SSID) on your access point and try connecting again. •Your access point is not turned on. Turn on your access point. Connecting Failure - Invalid Security •You configured security incorrectly. Check the configured security on your access point and machine. Connecting Failure - General Connection Error •Your computer is not receiving a signal form your machine. Check the USB cable and your machine power. •When Temporal Key Integrity Protocol(TKIP) security is set up for the access point, connection might fail. Change the access point settings. Connecting Failure - Connected Wired Network •Your machine is connected with wired network cable. Remove the wired network cable from your machine. PC Connection Error •The configured network address is unable to connect between your computer and machine. -For DHCP network environment The print receives the IP address automatically (DHCP) when computer is configured to DHCP. -For Static network environment The machine uses the static address when computer is configured to static address. If you computer has following addresses, -IP address: 192.168.1.100 -Subnet address: 255.255.255.0 -Gateway address: 192.168.1.1 Type in the following address for your machine, -IP address: 192.168.1.101 -Subnet address: 255.255.255.0 -Gateway address: 192.168.1.1 Solving other problems If problems occur while using the machine on a network, check the followings. For information on access point (or wireless router), refer to its own user's guide. •Your computer, access point or machine may not be turned on. •Check the wireless reception around the machine. If the reception is far from the machine or there is an obstacle, you might have difficulty receiving the signal. •Cycle the power for access point (or wireless router), machine and computer. Sometimes cycling the power can recover network communication. •Check whether firewall software (V3 or Norton) is blocking the communication. If the computer and the machine is connected on a same network it cannot be searched, firewall software might be blocking the communication. Refer to the user's guide for the software to turn it off and try searching the machine again. •Check whether the machine's IP address is allocated correctly. You can check the IP address by printing the network configuration report. •Check whether access point (or wireless router) has a configured security (password). If it has a password, refer to the access point (or wireless router) administrator. •Check whether the machine's IP address. Reinstall the machine driver and change the settings to connect to the machine on the network. Due to the characteristics of DHCP, the allocated IP address could change if the machine is not used for a long time or if the access point has been reset. •Check the wireless environment. You might not be able to connect to the network in the infrastructure environment where you need to type in a user's information before connecting to access point (or wireless router). •This machine only supports IEEE 802.11 b/g/n and Wi-Fi. For some counties, only 802.11 b/g can be applied. Other wireless communication (Bluetooth) is not supported. •When using the Ad-hoc mode, for operating systems such as Windows Vista, you might need to set the wireless connection setting every time you use the wireless machine. •You cannot use infrastructure mode and Ad-hoc mode at the same time for Samsung wireless network machine. •The machine is within the range of the wireless network. For most networks, the machine should be within 30 meters (100 feet) of the wireless access point (or wireless router). •The machine is located away from obstacles that could block the wireless signal. Remove any large metal objects between the access point (or wireless router) and the machine. Make sure the machine and wireless access point (or wireless router) are not separated by poles, walls, or support columns containing metal or concrete. •The machine is located away from other electronic devices that may interfere with the wireless signal. Many devices can interfere with the wireless signal, including baby monitors, motors, cordless phones, security system cameras,...
Otros modelos de este manual:Impresoras - SCX-3200 (10.73 mb)
Impresoras - SCX-3201 (10.73 mb)
Impresoras - SCX-3201G (10.73 mb)
Impresoras - SCX-3205 (10.73 mb)