Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Follow the instruction on the window. If the machine does not work in the network environment, activate IPv6. Refer to the next section followed by. Printing a network configuration report You can print a network configuration report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network and troubleshoot problems. 1.In ready mode, press and hold Stop/Clear button on the control panel for long enough (about four seconds) until the Status LED blinks fast. 2.Then, release the button. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: •MAC Address:00:15:99:41:A2:78 •IP Address:192.0.0.192 Setting IPv6 addresses Machine supports the following IPv6 addresses for network printing and managements. •Link-local Address: Self-configured local IPv6 address (Address starts with FE80). •Stateless Address: Automatically configured IPv6 address by a network router. •Stateful Address: IPv6 address configured by a DHCPv6 server. •Manual Address: Manually configured IPv6 address by a user. Manual address configuration 1.Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL (See "Using SyncThru™ Web Service (SCX-3205W(K) only)" on page 69). For IPv4, enter the IPv4 address (in the address field and press the Enter key or click Go. 2.When the SyncThru™ Web Service window opens, click Network Settings. 3.Click TCP/IPv6. 4.Enable the Manual Address In the TCP/IPv6 section. 5.Select the Address/Prefix and click the Add button, then the router prefix will automatically be entered into the address field. Enter the rest of address. (ex: 3FFE:10:88:194::AAAA. “A” is the hexadecimal 0 through 9, A through F.) 6.Click the Apply button. Installing printer driver Driver installation for network printer in IPv6 network environment is same as TCP/IPv4 (See "Installing network connected machine’s driver" on page 32). Select TCP/IP Port and when the list of machines are displayed, simply select your machine's IPv6 address. Using SyncThru™ Web Service 1.Start a web browser such as Internet Explorer that supports IPv6 addressing as a URL. 2.Select one of the IPv6 addresses (Link-local Address, Stateless Address, Stateful Address, Manual Address) from Network Configuration Report (See "Printing a network configuration report" on page 30). 3.Enter the IPv6 addresses (ex: Address must be enclosed in '[ ]' brackets. 4.wireless network setup (scx-3205w(k)) This chapter gives you step-by-step instructions for setting up the wireless network connected machine and software. This chapter includes: •Setting a wireless network with the WPS button •Using a wireless network from the computer •Setting a wireless network with USB cable •Setting a wireless network with network cable •Completing the installation •Troubleshooting For more information about the network environment, network programs, and installing network connected machine’s driver, refer to the following chapters. •See "Network environment" on page 30. •See "Introducing useful network programs" on page 30. •See "Installing network connected machine’s driver" on page 32. SETTING A WIRELESS NETWORK WITH THE WPS BUTTON You can install a wireless network with the WPS () button. After compleleting the wireless network connection, you need to install a machine driver to print from an application (See "Installing network connected machine’s driver" on page 32). Setting a wireless network with the WPS button If your machine and an access point (or wireless router) support Wi-Fi Protected Setup™(WPS), you can easily configure the wireless network settings by pressing the WPS () button on the control panel. If you want to use the wireless network using the infrastructure mode, make sure that the network cable is disconnected from the machine. Using the WPS (PBC) button or entering the PIN number from the computer to connect to the Access Point varies depending on the access point (or wireless router) you are using. Refer to the user's guide of the access point (or wireless router) you are using. Items to prepare You need to ensure you have the following items ready to use: •Check if the access point (or wireless router) supports Wi-Fi Protected Setup™ (WPS). •Check if your machine supports Wi-Fi Protected Setup™ (WPS). •Networked computer (PIN mode only) Refer to your network administrator, or the person that set up your wireless network, for information about your network configuration. Choosing your network connection There are two methods to connect your machine to a wireless network using the WPS () button on the control panel. The Push Button Configuration (PBC) method allows you to connect your machine to a wireless network by pressing both the WPS () button on the control panel of your machine and the WPS (PBC) button on a Wi-Fi Protected Setup™(WPS)-enabled access point (or wireles...
Otros modelos de este manual:Impresoras - SCX-3200 (10.73 mb)
Impresoras - SCX-3201 (10.73 mb)
Impresoras - SCX-3201G (10.73 mb)
Impresoras - SCX-3205 (10.73 mb)