Votos - 1, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
1.Press and hold the WPS () button on the control panel for about 2 - 4 seconds until the status LED blinks quickly. •: The light blinks slowly on wireless LED. The machine starts connecting to the wireless network. The LED blinks slowly for up to two minutes until you press the PBC button on access point (or wireless router). 2.: Press the WPS (PBC) button on the access point (or wireless router). The wireless LED blinks in the order below: a): The light blinks fast on the wireless LED. The machine is connecting to the access point (or wireless router). b): When the machine is successfully connected to the wireless network, the wireless LED light stays on. Connecting to the wireless network in PIN mode To connect your machine to the wireless network, follow the following steps: You need to check the status of the wireless LED. 1.The network configuration report including PIN number must be printed. In ready mode, press and hold the Stop/Clear button on the control panel for about 5 seconds. You can find your machine’s PIN number. 2.Press and hold the WPS () button on the control panel for more than 4 seconds until the status LED on. •: The light blinks slowly on the wireless LED. The machine starts connecting to access point (or wireless router). 3.You need to enter eight-digit PIN number within two minutes to the computer which is connected to the access point (or wireless router). The LED blinks slowly for up to two minutes until you enter the eight-digit PIN number The wireless LED blinks in the order below: a): The light blinks fast on the wireless LED. The machine is connecting to the access point (or wireless router). b): When the machine is successfully connected to the wireless network, the wireless LED light stays on. Re-connecting to the wireless network When the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address. In the following cases, the machine automatically re-connects to the wireless network: •The machine is turned off and on again. •The access point (or wireless router) is turned off and on again. Canceling a wireless network connection process To cancel the wireless network connection function when the machine is connecting to the wireless network, press and release the Stop/Clear button on the control panel. You need to wait 2 minuites to re-connect the wireless network. Disconnecting a wireless network connection To disconnect the wireless network connection, press the WPS () button on the control panel for more than two seconds. •When the Wi-Fi Network is in idle mode: The machine is immediately disconnected from the wireless network, and the wireless LED is off. •When the Wi-Fi Network is being used: While the machine waits until the current job is finished, the light blinks fast on the wireless LED. Then, the wireless network connection is automatically disconnected. The wireless LED is off. When the Wi-Fi Network is disconnected, press the WPS () button on the control panel. The Wi-Fi network is on and the setting a wireless network begins. USING A WIRELESS NETWORK FROM THE COMPUTER Choosing your network connection Typically, you can only have one connection between your computer and the machine at a time. There are types of network connections to consider. •Wireless network without access point (Ad-Hoc mode) •Wireless network with an access point (Infrastructure mode) How to print a network configuration report You can identify the network settings of your machine by printing a network configuration report. To print the report: 1.In ready mode, press and hold Stop/Clear button on the control panel for long enough (about four seconds) until the Status LED blinks fast. 2.Then, release the button. Using this Network Configuration Report, you can find your machine MAC address and IP address. For example: •MAC Address:00:15:99:41:A2:78 •IP Address:192.0.0.192 IP addresses Every device in a network has a unique numerical address called an IP Address. Your machine came with a Default IP address of 192.0.0.192, which you can verify by printing out a Network Configuration Report or Configuration Report. •DHCP IP assignment: Connect your machine to the network, and wait a few minutes for the DHCP server to assign an IP address to the machine. Then, print the Network Configuration Report as explained above. If the report shows that the IP address has changed, the assignment was successful. You will see the new IP address in the report. •Static IP assignment: Use the SetIP program to change the IP address from your computer (See "Setting IP address" on page 31). In an office environment, we recommend that you contact a network administrator to set this address for you. Wireless network name and network key Wireless networks require higher security, so when an access point is first set up, a network name (SSID), the type of security used, and a Network Key are created...
Otros modelos de este manual:Impresoras - SCX-3200 (10.73 mb)
Impresoras - SCX-3201 (10.73 mb)
Impresoras - SCX-3201G (10.73 mb)
Impresoras - SCX-3205 (10.73 mb)