Votos - 5, Puntuación media: 3.6 ( )

Fabricar: Design Dynamics Tamaño del archivo: 2.13 mb Nombre del archivo: Idioma del manual:

— Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. — WHAT TO DO IF YOU SMELL GAS • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediatelycallyourgassupplierfromaneighbor’s phone. Follow the gas supplier’s instructions. • If you cannot reach your gas supplier, call the fire department. — Installation and service must be performed by a qualified installer, service agency or the gas supplier. Save this manual for future reference. For more information, visit WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to this manual for correct installation and operational procedures. For assistance or additional information consult a qualified installer, service agency or the gas supplier. WARNING: This appliance is for installation only in a solid-fuel burning masonry or UL127 factory-built fireplace, constructed of noncombstible material and connected to a working flue. (See page 6 for minimum flue opening. WARNING: This is a gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventilation air must be provided. Refer to the National Fuel Gas Codes, ANSI Z233.1/NFPA 54, Section 5.3, Air for Combustion and Ventilation. This appliance may be installed in an aftermarket,* permanently located, manufactured (mobile) home, where not prohibited by local codes. This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases. * Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer State of Massachusetts: The installation must be made by a licensed plumber or gas fitter in the Commonwealth of Massachusetts. TABLE OF CONTENTS Safety Information ............................................... 3 Technical Service .............................................. 12 Product Identification........................................... 4 Replacement Parts............................................ 12 Local Codes ........................................................ 4 Troubleshooting................................................. 13 Unpacking ........................................................... 5 Specifications .................................................... 15 General Information............................................. 5 Wiring Diagram.................................................. 15 Installation ........................................................... 5 Illustrated Parts Breakdown and Parts List ....... 16 Operating Appliance .............................

Descargar ahora

Introduzca dos números de la imagen: