Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
• Turn the power off, eliminate the short-circuiting, then turn on the power again. Sound is not output from one of the speakers. • The speaker cord is disconnected. • The BALANCE control is set to an extreme position. • Connect it properly referring to “System connection”. 6 • Adjust the Left/Right balance. ! Speaker protection circuit When this unit’s power is turned ON with the speaker cable short-circuited, the speaker protection functions. If the standby indicator blinks (KAF-3010R) or the MUTING indicator blinks (KAF-1010) and no sound occurs, turn the power OFF, remove the short-circuit, then turn the power ON again. NoteNoteNote Do not use contact cleaners because it could cause a malfunction. Be specially careful against contact cleaners containing oil, for they may deform the plastic components. Specifications Caution : Read this page carefully to ensure safe operation. KAF-3010R/1010 (En) KAF-3010R Rated output power (DIN) 1 kHz at 8 W .............................................................. 70 W + 70 W at 4 W .......................................................... 100 W + 100 W (IEC/DIN) from 63 Hz to 12.5 kHz, 0.7 % T.H.D. at 8 W .............................................................. 65 W + 65 W at 4 W .......................................................... 100 W + 100 W Effective output power Except UK and Europe (EIAJ) 1 kHz, 10 % T.H.D. at 8 W .............................................................. 95 W + 95 W at 4 W .......................................................... 130 W + 130 W Damping factor ........................................................ 42 (50 Hz) Total harmonic distortion ........................................... 0.04 % (20~20 kHz, 50 W, 4 W ) ................................................... 0.01 % (1 kHz, 50 W, 4 W ) Frequency responce (IHF'78) CD, TUNER, TAPE, MD ........... 5 Hz~85 kHz, +0 dB, -3 dB PHONO 'RIAA' responce ...... 20 Hz~20 kHz, +1.0 dB, -1.0 dB Maximum input level PHONO (MM) .................... 100 mV, 0.5 % T.H.D. at 1 kHz Signal to noise ratio PHONO (MM) ............................................... 72 dB (IHF'66) CD, TUNER, TAPE, MD ............................. 100 dB (IHF'66) PHONO (MM) ........................ 60 dB (DIN, 50 mW output) CD, TUNER, TAPE, MD ........ 60 dB (DIN, 50 mW output) Input sensitivity/impedance PHONO (MM) ............................................... 2.5 mV/33 kW CD, TUNER, TAPE, MD .............................. 200 mV/47 kW Tone control BASS......................................................±10 dB (at 100 Hz) TREBLE .................................................. ±10 dB (at 10 kHz) LOUDNESS control VOLUME at -30 dB level ........................ +9 dB (at 100 Hz) Output level/impedance TAPE REC, MD REC ................................... 200 mV/2.7 kW General Power consumption ...................................................... 200 W AC outlet SWITCHED ........................................ 2 (total 200 W max.) UNSWITCHED ............................................ 1 (100 W max.) Dimensions ............................................................ W: 440 mm H: 145 mm D: 400 mm Weight (net) .................................................................. 8.3 kg KAF-1010 Rated output power (DIN) 1 kHz at 8 W .............................................................. 40 W + 40 W at 4 W .............................................................. 60 W + 60 W (IEC/DIN) from 63 Hz to 12.5 kHz, 0.7 % T.H.D. at 8 W .............................................................. 40 W + 40 W at 4 W .............................................................. 60 W + 60 W Effective output power Except UK and Europe (EIAJ) 1 kHz, 10 % T.H.D. at 8 W .............................................................. 55 W + 55 W at 4 W .............................................................. 75 W + 75 W Damping factor ........................................................ 42 (50 Hz) Total harmonic distortion ........................................... 0.06 % (20~20 kHz, 30 W, 4 W ) ................................................... 0.01 % (1 kHz, 30 W, 4 W ) Frequency responce (IHF'78) CD, TUNER, TAPE, MD ........... 5 Hz~85 kHz, +0 dB, -3 dB PHONO 'RIAA' responce ...... 20 Hz~20 kHz, +1.0 dB, -1.0 dB Maximum input level PHONO (MM) .................... 100 mV, 0.5 % T.H.D. at 1 kHz Signal to noise ratio PHONO (MM) ............................................... 65 dB (IHF'66) CD, TUNER, TAPE, MD ............................... 98 dB (IHF'66) PHONO (MM) ........................ 60 dB (DIN, 50 mW output) CD, TUNER, TAPE, MD ........ 60 dB (DIN, 50 mW output) Input sensitivity/impedance PHONO (MM) ............................................... 2.5 mV/33 kW CD, TUNER, TAPE, MD .............................. 200 mV/47 kW Tone control BASS......................................................±10 dB (at 100 Hz) TREBLE .................................................. ±10 dB (a...
Otros modelos de este manual:El receptor y el amplificador - KAF-3010R (459.4 kb)