Votos - , Puntuación media: ( )

Manual de usuario Kenwood, modelo KAF-3010R

Fabricar: Kenwood
Tamaño del archivo: 459.4 kb
Nombre del archivo:

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

2. If your amp or receiver does not have a system control terminal, do not connect any system control cords to the system control terminals on the other compo- nents. 3. Do not connect system control cords to any components other than those speci- fied by KENWOOD. It may cause a malfunction and damage your equipment. 4. Be sure the system control plugs are inserted all the way in to the system control terminals. A SL 16 XS-8 + – – + PHONO CD TUNER TAPE SYSTEM CONTROL SPEAKERS AC OUTLETS UNSWITCHED 100W MAX. SWITCHED TOTAL 200W MAX. iA or B : 4–16W , A and B : 8–16W j REC PLAY REC PLAY MD SIGNAL GND L R R R B A A SL 16 XS-8 SYSTEM CONTROL SYSTEM CONTROL selector switch No matter to which of the two terminals the connection is made, the use method is the same. The system control operations Remote Control The remote control supplied with this unit can also be used to control the other components in the system. Automatic Operation (except [XR] equipment) Automatically switches the input selector on the amp or receiver when you start playback from this unit. Synchronized Recording (except [XR] equipment) Lets you synchronize recording with the start of playback when recording from CD, MD, or LD. KAF-3010R/1010 (En) 6 Connection of speakers Connect the speakers as shown below, ensuring that bare wires do not make contact with other terminals. 1 Strip coating. 3 Insert. 2 Loosen. 4 Secure. Speaker system A LEFT RIGHT A SL 16 XS-8 + – – + PHONO CD TUNER TAPE SYSTEM CONTROL SPEAKERS iA or B : 4–16W , A and B : 8–16W j REC PLAY REC PLAY MD SIGNAL GND L R R L R L B A a» a » » aa » LEFT RIGHT Speaker system B • Never short-circuit the + and – speaker cords. • If the left and right speakers are connected inversely or if the speaker cords are connected with reversed polarity, the sound becomes unnatural with ambiguous acoustic image positioning. Be sure to connect the speakers and speaker cords correctly. Speaker impedance When only one pair of speakers is connected to A or B speaker terminals, use the speakers having an impedance of 4 to 16 W . When two pairs of speakers are connected to both A and B terminals simultaneously, use the speakers having an impedance of 8 to 16 W . In this case, connecting a speaker having an impedance of less than 8 W may cause malfunction of the amplifier. NotesNotes 1 Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced. 2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging / unplugging connection cords without removal of the power cord can cause malfunctions or damage to the unit. 3 Do not connect up a power source which is larger than that indicated on the socket at the rear of the unit. Controls and indicators KAF-3010R/1010 (En) Main unit PHONES A SPEAKER B BASS TREBLE BALANCE INPUT SELECTOR MUTING LOUDNESS ON OFF POWER ON/STANDBY MIN MAX VOLUME CONTROL MDTAPETUNERPHONOCD SOURCE DIRECT thermally reactive advanced instantaneous transistor TRAITL R 1 42 5 6 7 8 9 0 &^%$#@! ON OFF ON OFF POWER POWER ON/STANDBY KAF-3010R KAF-1010 1 POWER switch (KAF-3010R) 0 Usually leave this switch to the on position. When the unit is not to be used for a long period of time, set the switch to the OFF position for safety. 2 ON/STANDBY key (KAF-3010R) 0 This key effective when the POWER key is set to the on (standby) position, and pressing this key turns power ON and off (standby). 3 Standby indicator (KAF-3010R) 4 POWER switch (KAF-1010) 0 5 BASS knob ! To adjust low frequencies. 6 TREBLE knob ! To adjust high frequencies. 7 INPUT indicator 0 An indicator lights for the source selected with the INPUT SELECTOR knob. 8 VOLUME CONTROL knob 0 Adjust the volume. 9 SOURCE DIRECT indicator @ 0 SOURCE DIRECT key @ To listen to a source with high quality sound. ! PHONES jack @ Used for headphone listening. @ SPEAKERS A/B switches 0 Press to select the A and/or B speaker systems. # BALANCE knob ! Adjust the volume balance between left and right. $ INPUT SELECTOR knob 0 Turn to select the input sources. % MUTING key/indicator ! Mute the sound temporarily. ^ LOUDNESS key/indicator ! Use to emphasize deep bass sounds. & Remote sensor (KAF-3010R only) 9 About the standby indicator (KAF-3010R only) This unit has a standby indicator that lights to show that a small amount of current is being supplied to the unit in order to preserve the memory. This is called the Standby mode. When the Standby indicator is lit, the amplifier can be switched ON / STANDBY from the remote control. KAF-3010R/1010 (En) 8 Remote control unit (KAF-3010R only) The part of the illustration designates keys that can be used to operate KENWOOD components connected with the system control. The rest of the illustration designates keys that have the same functions as the keys on the main unit. REMOTE CONTROL UNIT RC-A0300 4 . 7 6 4 . 7 3 8 ¦ 1 A 8 ¦ . . % % 1 A 27 3 A DISC SKIP B AUX TUNER CD TAPE POWER MD PHONO MUTE VOLUME CONTROL SOURCE DIR...