Para seleccionar un ordenador utilizando el raton, pulse y suelte los botones izquierdo o derecho mientras mantiene pulsado el boton del medio. Para seleccionar un ordenador utilizando las teclas rapidas del teclado, mantenga pulsadas las teclas CTRL y ALT, pulse y suelte la tecla del puerto requerida (p.e. 1) y a continuacion suelte las teclas CTRL y ALT. Informacion sobre seguridad Solamente debe usarse en interiores, en entornos secos y sin grasa. No intente realizar ningun tipo de mantenimie

... . .... . ........ .... .. ... .... ... .... ....... .... ..... Contents Introduction Welcome.......................................................................................4 Creating larger installations........................................................5 Cascade installations................................................................5 Enterprise installations............................................................5 AdderView CATxIP 5000 features - front and rear........

non-USB) are interrupted, often they fail to re-initialise when reconnected. The Adder TS4 provides a feature to reinstate mouse communications once the necessary connections have been made. There are two main types of data formats used by current non-USB mice, these are the older ‘PS/2’ format and the more recent ‘IntelliMouse®’ format introduced by Microsoft. These use slightly different data arrangements and it is important to know which type was being used before you hot-plugged the system t

¦ Provision terminal port as follows: Data Rate — 1.2 to 19.2 kbps Asynchronous Data Format — eight data bits, no parity (none), one stop bit ¦ When using a PC with terminal software, be sure to disable any power saving programs. PROVISIONING NOTES ¦ This unit can be provisioned via the RS-232 port or remotely via ITS codes. This unit cannot be provisioned from the faceplate four-character display. Select “2” from the ADTRAN HDSL2 Main Menu Screen to view the Provisioning Screen. PRICING AND AVA

Box 140000 Huntsville, AL 35814-4000 (256) 963-8000 © 2002 ADTRAN, Inc. All Rights Reserved. Printed in U.S.A. The following conventions are used in this manual. KOH Notes provide additional useful information. OUT... Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life. IMPORTANT SAFETY INFORMATION When using your telephone equipment, please follow these basic saf

The.timezone.specifier.takes.the.following.form:. .....std.offset.dst.[offset],start[/time],end[/time] The.std.and.offset.specify.the.standard.time.zone,.such.as.GMT.and.0,.or.CET. and.-1,.or.EST.and.5,.respectively.. The.dst.string.and.[offset].specify.the.name.and.offset.for.the.corresponding. Daylight.Saving.Time.zone;.if.the.offset.is.omitted,.it.defaults.to.one.hour.ahead. of.standard.time.. The.remainder.of.the.specification.describes.when.Daylight.Saving.Time.is.in. effect..The.start.fiel

ADTRAN® reserves the right to change the contents without prior notice. In no event will ADTRAN be liable for any special, incidental, or consequential damages or for commercial losses even if ADTRAN has been advised thereof as a result of issue of this document. ® 901 Explorer Boulevard P.O. Box 140000 Huntsville, AL 35814-4000 (256) 963-8000 ©2008 ADTRAN, Inc. All Rights Reserved. 61182301E1-5A Revision History Revision History Date Description A January 2008 Initial release Conventions The fo

Green V.35/V.36 “Receive Line Signal Detector” or X.21 “Indication” control line from the NTU (DCE) is on Off Local Loop is not active Yellow Active Local Loopback on the selected port Red Active Local Loop on one or more ports or services (when no port is selected) Off Remote Loop is not active Yellow Active Remote Loopback on the selected port (when determined via established EOC) Red Active Remote Loop on one or more ports or services (when no port is selected) used either as a remote unit to

INSTALLATION .......................................................3 3. CONFIGURATION ...................................................4 4. OPERATIONAL DESCRIPTION .............................5 5. NORMAL OPERATION ...........................................6 6. PROTECT OPERATION...........................................6 7. PROTECTION SWITCH ...........................................8 8. SWITCHBACK ........................................................10 9. AUTO-PROTECT OPERATION .......

WARNING Warnings inform the user of potential bodily pain, injury, or death. Training This page is intentionally blank. 1.GENERAL Figure 1. HDSL4 239 T1 HDSL4 Repeater (H4R) 2.DESCRIPTION .TC PAM line coding .Lightning protection .In-band loopback control .Standard 239 form factor repeater apparatus case design .Remote provisioning and pass-through performance monitoring .Bad Splice Detection .Fast Retrain NOTE The Splice Detection Feature is included with this product as an aid to troubleshooti