Votos - 4, Puntuación media: 4.8
(
)
)
|
Resumen del manual
1 Cautions 2 Cooling Heating Indoor outdoor Rated Maximum Minimum 27 32 18 19 23 14 35 43 -5 24 26 -- 20 27 15 14.5 -- -- 7 24 -15 6 18 -- DB C WB C DB C WB C Indoor outdoor DB C WB C DB C WB C Cautions D AE072FCAKA AE242FCAKA AE092FCAKA , AE122FCAKA , AE142FCAKA , AE182FCAKA , AE212FCAKA have the Return air box (see the following picture) when shipping from the factory and they are back-side return air. During the installation, also can be changed to Down-side Return air according to the user's need. AE09~212FCAKA 3 D D fig(1) Left picture is a wired remote controller, which can be used on AE072FCAKA(wired control), AE092FCAKA (wired control), AE122FCAKA(wired control), AE142FCAKA(wired control),AE182FCAKA(wired control),AE212FCAKA(wired control), AE242FCAKA (wired control). The remote controller can be purchased extrally. R OFF H AUTO io n Wired remote Controller using method: 1.Use one wired remote controller. See fig (1) 2.Also can buy a remote controller extrally, realize wired remote control + remote control dual control modes. The right figure is a remote controller, which can be used on AE072FCAKA(remote control), AE092FCAKA(remote control), AE122FCAKA(remote control), AE142FCAKA (remote control),AE182FCAKA(remote control), AE212FCAKA(remote control), AE242FCAKA(remote control) and the matching remote control receiver Remote control receiver using method : Use remote controller control the remote control window of the remote control receiver. SWING CODERESET HEALTH FAN TEMP MODE LOCK TIMER ON OFF SWING FRESH SET LOCKRESET HEALTH FAN TEMP MODE SLEEP CLOCK TIMER ON OFF LIGHT SET ROOM MODE FAN TEMP CLOCK SET TIMER SLEEP RESETFILTER RESET HEALTH SWING C* AUTO ON/OFF Remote controlller (1) Wire remote controlller Remote controlller is an accessory, to be ordered extrally Remote controlller (2)Remote receiver (2) B A fig(2) 4 D 14 15 16 17 SUR 1 2 3 4 5 6 7 8 9 11 12 13 20 21 22 23 24 25 26 27 28 AUTO 10 MODE FAN SWING TEMP CLOCK SET TIMER SLEEP RESETFILTER RESETON/OFF SET HEALTH 29 30 18 19 13.Sleep state display 14.Network control display 15.Working mode display Workingmode Auto operationCoolingoperation Dehumidifyingoperation Heatingoperation Fan operation Wire controller 16.Electric heating display 17.Operation mode button Used to set working mode: Auto, Cooling, Dehumidifying, Heating, Fan18.Fan speed button Used to set fan speed: LowFan, Med Fan, High Fan, Auto19.Swing button Used to set Auto Swing orFixed air sending direction 20.Temperature Setting button Used to set temperature, temperature range: 16 C~30 C 21.Clock button Used to calibrate the time of timer and clock 1.ON/OFF button Used to turn on/off unit 2.Temperature display 3.Clock display 4.Timer ON/OFF display 5.Humidity display 6.Air filter cleaning display When there is too much dust collected on the air inlet, the wire controller will show this display to remind theuser to clean the air inlet. After cleaning and installation, just press the air filter reset button. 7.Super/Soft operation display 8.Fan speed display Auto Low Fan Med Fan High Fan Auto 9.Auto Swing display 10.Health state display 11.Fresh air state display 12.Humidifying state display Note: 1.This model does not have the following related display and function 2.The outdoor unit no oxygen-bar function or no negative ion unit no 5 6 7 9 11 12 14 16 26 1910 healthl function display. Calibration of clock 22.Setting button Used to confirm the time of timer and clock 23.Sleep button Used to set Sleep state 24.Time Adjustingbutton Used to adjust thetime of timer and clock 25.Reset button When the wire controller appears abnormal condition, use a sharp-pointedarticle to press thisbutton to make the wire controller resume normal 26.Air Filter Reset button After cleaning theair inlet, press thisbutton, the unit can start to operate 27.Timer button Used to set the mode of timer 28.Lock state display 29.Health Used to control the generating oxygenfunction and negativeion-function 30.Remote control window Used to receive the remote control signal When turning on the unit for the first time, the clock should be calibrated. The method of calibration is: 1.Press iClocki button, the Clock display iAMi iPMi will flash. 2.Press or to adjust time. For each press, the time will increase or decrease 1 *minute. If depressing the button, the time will increase or decrease rapidly. 3.After confirming the time, press iSeti button, iAMi or iPMi will stop flashing,the clock will begin to work. 5 D Remote LCD display contents and key name and each key function introduction SWING FRESH SET LOCKRESET LIGHT HEALTH FAN TEMP MODE SLEEP CLOCK TIMER ON OFF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 29 28 27 25 24 26 20 21 22 23 30 31 1.ON/OFF button Used to turn on/off unit Note: Wired remote controller his key have complcooling running function. 2.Operation mode button Used to set working mode: Auto, Cooling, Dehumidifying, Heating, Fan 3.Health Used to control the generating oxygen functionand negati...
Otros modelos de este manual:Máquinas de rectificar - AE092FCAKA (3.19 mb)
Máquinas de rectificar - AE09~212FCAKA (3.19 mb)
Máquinas de rectificar - AE122FCAKA (3.19 mb)
Máquinas de rectificar - AE142FCAKA (3.19 mb)