330 lbs. Length/Width/Height.......................................................................................................................46 x 22 x 16-5/8 in. Foot Print (Length/Width).................................................................................................................47-1/2 x 12-1/2 in. Shipping Dimensions: Type.................................................................................................................................................

3960 lbs. Length/Width/Height........................................................................................................................98 x 78 x 72-1/2 in Foot Print (Length/Width).................................................................................................................86-1/2 x 22-1/2 in. Shipping Dimensions: Type................................................................................................................................................

4740 lbs. Length/Width/Height..................................................................................................................... 102 x 38-1/4 x 51 in. Foot Print (Length/Width)........................................................................................................................... 102 x 32 in. Shipping Dimensions: Type............................................................................................................................................

Alignment of longitudinal bed slide ways in vertical plane: 0.04mm (0.0015") 0.018mm b. Parallelism of transverse direction: 0.04mm (0.0015") in 1000mm (39.370") 0.03mm 0.0007" 0.0012" G2 Parallelism of tailstock to longitudinal motion carriage: a. In vertical plane 0.02mm in 500 mm b. In horizontal plane 0.02mm (0.0008") in 500mm (19.685") 0.01mm 0.01mm 0.0004" 0.0004" G3 Cam action of spindle 0.015mm (0.0006") 0.008mm 0.0003" G4 Spindle nose runout 0.01mm (.0004") 0.005mm

A risk of explosion and burning exists if these products are used. Serious personal injury may occur. -8-G8691 Wood Lathe w/ Stand SECTION 4: ASSEMBLY Beginning Assembly Most of your Model G8691 Wood Lathe has been assembled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps. Please follow along in the order presented here. TOOLS REQUIRED: A metric socket set, 6" adjustable wrench, and Phillips® head screw driver. All d

10.Always keep a firm hold on and maintain control of the cutting tool. 11.If you are uncertain about the optimal speed, it is better to start with the slowest RPM and increase your speed as your comfort with the tool and the work piece increases. 12.Never force the tool or attachment to do the work of a larger industrial tool. It is designed to do the job better and more safely at the rate for which it was intended. REMOVING THE SPUR AND CUP CENTERS 1. Insert a pin into the Spindle (#28) hole a

Adjust the stylus height until the follower edge is centered on the template or profile. Tighten the setscrew to secure the stylus. Figure 11. Stylus follower edge. G2891 Lathe Copy Attachment -13 SECTION 5: Operations Overview This Copy Attachment will produce any number of duplicate spindles from one master profile or template. The advantages provided by this accessory for your wood lathe are readily apparent, in terms of consistency and labor savings. While the Copy Attachment provides a subs

SECTION 9: PARTS Bed 1 P9249001 ROD END CAP 2 P9249002 BALL OILER 3 PSB05M CAP SCREW M8-1.25 X 50 4 PRP30M ROLL PIN 5 X 50 5 PSS09M SET SCREW M8-1.25 X 20 6 PN03M HEX NUT M8-1.25 7 P9249007 FEED ROD 8 P9249008 SPINDLE DIRECTION ROD 9 P9249009 CHIP PAN 10 P9249010 SWITCH COVER 11 PS14M PHLP HD SCR M6-1 X 12 12 P9249012 ECCENTRIC BRACKET 13 PSS02M SET SCREW M6-1 X 6 14 PSB26M CAP SCREW M6-1 X 12 15 P9249015 SWITCH BRACKET 16 P9249016 BED 17 P9249017 LEADSCREW BUSHING 18 PRP05M

SECTION 9: PARTS Headstock Breakdown -56- G9972Z 11" x 26" Lathe w/Gearbox Headstock Parts List REF PART # DESCRIPTION 1 P9972Z0001 HEADSTOCK NAMEPLATE 2 PS17M PHLP HD SCR M4-.7 X 6 5 PSB06M CAP SCREW M6-1 X 25 6 PW03M FLAT WASHER 6MM 7 P9972Z0007 COMPRESSION SPRING .8 X 8 X 20 8 P9972Z0008 THREADED BLOCK 10 PSB06M CAP SCREW M6-1 X 25 11 P9972Z0011 SPINDLE 12 PK123M KEY 10 X 10 X 55 13 P9972Z0013 SPACER 14 P32009 TAPER ROLLER BEARING 32009 15 P9972Z0015 HEADSTOCK CASTING 16 PS

Be careful not to split the work- piece. See Figure 6B. Wood with splits along the grain may fly off during the operation. With dense wood, drill a hole at the centers and score lines with a saw blade for the spur. -12- G8690 Variable Speed Wood Lathe 1/4" Figure 6B. Spur center set into wood stock. 4. Once the spur center is firmly attached to the workpiece, insert the spur center (with the attached workpiece) into the headstock spindle. Be certain the hex nut is threaded onto the spindle befor