• NEVER leave child unattended. High Chair Use: • ALWAYS secure child with restraint belts adjusted to fit your child snugly. The tray is not designed to hold child in the product. When attached to adult chair: • Use restraint belts until child is able to get in and out of the product without help (about 21/2 years old). • NEVER use in motor vehicles. • ALWAYS secure the product on a chair using bottom and back attachment straps. NEVER use on a stool or bench that does not have a seat back. To p

Hint: The #10 x 2,2 cm black screws may have been assembled to the screw retainers. Seat Height Adjusters Position 4 Press Lever • While pressing the levers on the seat height adjusters, lift them to position 4 on the frame front legs, as shown. 8 Seat Assembly SocketsSockets esSeat Bottom Tubes 9 • Fit the seat assembly between the frames. • Insert the seat bottom tubes into the sockets in each seat height adjuster. Hints: • Be sure the seat height adjusters are in the same position (position 4

The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair. • It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. • Always keep child in view while using the high chair. • Never leave child unattended. This package contains small parts in its unassembled state. Adult assembly is required. CAUTION IMPORTANT! Please keep these instructions for future reference. • Please re

Pour retirer le coussin : • A l'arriere du produit, appuyer sur les pattes de degagement et retirer le systeme de retenue de la cheville. • A l'avant du produit, retirer le systeme de retenue. • Detacher les attaches du coussin du devant du siege. Enlever le haut du coussin fixe au dossier. • Pour replacer le coussin, se referer aux etapes 8 a 12 de l'assemblage. IMPORTANT ! Ne jamais utiliser ce produit sans le systeme de retenue. Remettre en place les courroies ventrales et d’epaule et la cour

Requires three “AA” batteries (included). Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). L4889 Please keep this instruction sheet for future reference, as it contains important information. Requires three “AA” batteries (included). Adult assembly is required. Tool required for assembly: Phillips screwdriver (not included). Parts Consumer Information Seat Bottom Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the sc

Tighten the screw. •Repeat this procedure to fasten the other frame back leg to the other side of the back base. Hint: The #10 x 2,2 cm black screws may have been assembled to the screw retainers. Frame Decorated Side Frame Back Legs Back Base Screw Retainers 8 •While pressing the levers on the seat height adjusters, lift them to position 4 on the frame front legs, as shown. Seat Height Adjusters Position Press Lever 9 •Fit the seat assembly between the two frames. •Insert the seat bottom tubes

Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. • Always keep child in view while in the high chair. • Never leave child unattended. • Do not use the high chair unless all components are correctly fitted and adjusted. Prevent

Pull on the belts to be sure they are secure in the seat back. Shoulder Portion 5 To change shoulder belt slots: • From the back of the high chair, push the shoulder portion of the waist/shoulder belts through the seat back slots. 12 Securing Your Child 4 • To tighten the shoulder belts: Hold the adjuster and pull the front shoulder strap down. • To loosen the shoulder belts: Slide the adjuster down. Note: After adjusting the restraint system to fit your child, make sure you pull on it to be sur

Please read these instructions before assembly and use of this product. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). Warning and Caution WARNING Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • Always keep child in view while in the high chair. • Never leave child unattended. • It is recommended tha

Tool needed for assembly: Phillips Screwdriver (not included). Product features and decoration may vary from the photo above. Deluxe Plus Healthy Care High Chair ™ Discover what’s possible™…Model Number: B0325 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included). Product features and decoration may vary from the photo above. Deluxe Plus Healthy Care High Chair ™ Dis