Votos - 0, Puntuación media: 4
(
)
)
|
Resumen del manual
Items need room totumble J J_ freely for even drying and lesswrinkling. Do not overload dryer. ,,_ ',_ • When drying large items, dryonly2 or 3 at atime. Filloutthe load with small and medium sized items. Fordelicate or very small loads, add 2 lint-free towels for better drying, less wrinkling, and to prevent grease stains caused by fabric softener sheets. Donotoverdryitems.Overdryingcancausewrinkling, shrinkage, harshness, Place small items in a mesh bag. and a build-up of static electricity, which can produce more lint. If desired, add a dryer fabric softener sheet. 4. Close the dryer door and set dryer controls (some models). See Operating Instructions card for your specific model controls. 5. Turn cycle selector clockwise to the desired setting. . Start the dryer. • PushStartButtonfor2secondsorturntheSTARTknobclockwiseto ON,hold for 1-2 seconds and release. • To add or remove itemswhen the dryer is running, open the door. The dryer will always stop when the door is opened. Allow the drum to come to a complete stop before reaching inside. • To restart dryer, close the door then push the Start Button for 2 seconds or turn the STARTknob clockwise to ON, hold for 1-2 seconds and release. • The dryer will not start if the cycle selector is in the OFFposition. 7. When the cycle ends, remove items immediately and hang Fill dryer drum 1/3 to 1/2 full. or fold. If load is removed before the cycle ends, turn cycle selector to OFF. Features Placethe front bar under the lip of the lint screen opening. Cycle Signal Control (some models) When the Cycle Signal Control is ON, a signal will sound at the end of each cycle and during the Fabric Sentry setting (some models). The volume is adjustable on some models. Drum Light (some models) A drum light will come on whenever the door is opened to illuminate the dryer drum during loading and unloading. Closing the door turns off the light. Reversible Dryer Door Your dryer is equipped with a reversible door. The door can be hinged on the right or left side. Refer to the INSTALLATIONINSTRUCTIONSfor directions on changing the door. Drying Rack (some models) Usethe drying rack to dry items which should not be tumble dried. 1. Open the dryer door and remove the lint screen. 2. Insert drying rack into the dryer drum. Place the front bar under the lip of the lint screen opening. 3. Place items to be dried on top of the rack. Weight should not exceed 10 Ibs. Leavespace between items, but do not let items hang over the sides or through the grids. Do not tumble other items when using the drying rack. 4. Select atimed drysetting best suited for items being dried. Useonlythe Air Fluff (no heat) temperature setting for items containing plastic, foam rubber, rubberlike materials, feathers or down. 5. When items are dry, remove the rack and replace the lint screen. If lint screen is not in place, tumbling items could enter the exhaust system and cause damage to the dryer. Common Drying Problems Many drying problems involve poor ...
Otros modelos de este manual:Secadoras - P/N 131883600 (9907) (618.61 kb)
Secadoras - P/N 131883600 (9907) (618.61 kb)
Secadoras - P/N 131883600 (9907) (618.61 kb)
Secadoras - P/N 131883600 (9907) (618.61 kb)