Iniciar sesión:
Votos - 4, Puntuación media: 4 ( )

Manual de usuario Electrolux - Gibson, modelo P/N 131883600 (9907)

Fabricar: Electrolux - Gibson
Tamaño del archivo: 618.61 kb
Nombre del archivo: c649fca2-8a79-4a55-97bd-27fe1139e828.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


• Leaving items in dryer after cycle ends. SOLUTIONS • Rub fabric softener stains with bar soap. Rinse and rewash, • Reduce load size and rewash using liquid fabric softener in the final rinse. • Or, add a fabric softener sheet and tumble without heat. • Use lint brush or roller to remove lint. • Use a lint brush or shaver to remove pills. • Irreversible condition. • Reduce load size and tumble at medium or low heat for 5-10 minutes. • Remove items immediately. Hang or fold. PREVENTIVE MEASURES • Add a few bath towels to small loads for proper tumbling. • Some "silk-like" fabrics should be air dried. • Use proper drying temperature. • Place fabric softener sheet on top of load before starting the dryer. • Do not overload dryer. • Use fabric softener in washer or dryer to reduce static electricity. • Remove items when they are slightly damp to avoid overdrying. • Check that lint screen is clean and in place. • Use fabric softener to lubricate fibers. • When ironing, use spray starch or fabric finish on collars and cuffs. • Turn items inside out to reduce abrasion. • Follow fabric care label directions. If shrinking is a concern, check load often. • Remove items while slightly damp and hang or lay flat to complete drying. • Block knits into shape. • Do not overload dryer. • Remove items as soon as cycle ends. 5 Care and Cleaning To reduce risk of fire or serious injury to persons or property, comply with the basic warnings listed in Important Safety Instructions, pages 2-3, and those listed below. • Before cleaning the dryer interior, unplug the electrical power cord to avoid electrical shock hazards. iiii!ii: :: : : iii!iiii!iiiiii!iii!iiiiiii!iliiiiiiii!iiii!iiii' i!!ii!i!!iiiiii!iiiiiii!ilill Clean lint screen after every load. Do not store or place laundry products on top of dryer at any time. They can damage the finish or controls. • Do not use any type spray cleanser when cleaning dryer interior. Hazardous fumes or electrical shock could occur. Inside • Clean the lint screen after every load. Lint build-up in the screen restricts air flow, which causes longer drying times. The screen is located at the bottom of the door opening. Remove by pulling straight up. Remove the lint and replace the screen. Occasionally a waxy build-up may form on the lint screen from using dryer- added fabric softener sheets. To remove this build-up, wash the lint screen in warm, soapy water. Dry thoroughly and replace. Do not operate the dryer without the lint screen in place. If the dryer drum becomes stained from noncolorfast fabrics, clean the drum with a damp cloth and a mild liquid household cleanser. Remove cleanser residue before drying the next load. Every 18 months an authorized servicer should clean the dryer cabinet interior and exhaust duct. These areas can collect lint and dust over time. An excessive amount of lint build-up could result in inefficient drying and possible fire hazard. Outside • Clean the cabinet with mild soap and water. Never use harsh...

Otros modelos de este manual:
Secadoras - P/N 131883600 (9907) (618.61 kb)
Secadoras - P/N 131883600 (9907) (618.61 kb)
Secadoras - P/N 131883600 (9907) (618.61 kb)
Secadoras - P/N 131883600 (9907) (618.61 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría