Votos - 4, Puntuación media: 4.3 ( )

Fabricar: Electrolux Tamaño del archivo: 285.6 kb Nombre del archivo: Idioma del manual:

6. Attach the white (neutral) power cord conductors to the outer cord and the green ground wire from the dryer harness to the brass-colored center terminal on the terminal block. Tighten the screw securely. 7. Attach the red and black power cord conductors to the outer brass-colored terminals on the terminal block. Warning: Do not make a sharp bend or crimp wiring /conductor at connections. 8. Tighten the screws securing the cord restraint firmly against the power cord. 9. Tighten the strain relief nut securely so that the strain relief does not turn. 10. Reinstall the terminal block cover. Caution: Label all wires prior to disconnection, when servicing controls. Wiring errors can cause improper operations and be dangerous. Check unit for proper operation after servicing. Warning: Discard or destroy the carton and plastic bags after the dryer is unpacked. Children should not be allowed to use them to play with. Cartons covered with rugs. Bedspreads, or plastic sheets can become an airtight chamber and cause suffocation leading to death. Make all packing materials inaccessible to children. Warning: The instructions in this manual and all other literature included with this dryer can not cover every possible condition and situation that may occur. Good safe practice and caution must be applied when installing, operating and maintaining any appliances, after installing, if you are in doubt, call a certified electrician to install and wire the dryer. 12 English OPERATING INSTRUCTIONS Understanding the Control Panel Note: Features may vary per model. Start/Pause Button: (1) • Press the button to turn the dryer ON. Press this button once to start the dry process. Press this button once again to pause the activity during the dry cycle. Off Button: (2) • Press the button to turn on drayer off. Signal Button: (3) • Used to select buzzing volume or turn off the buzzer. Temp Button: (4) • Used to set drying temperature. There are 4 available drying temperatures: High, Medium, Low, and Air Dry (no heat). Sensor Dry Level Button: (5) • Used to set drying time of auto-programs. If no auto-program is selected, pressing the button will cause the chime to sound. Wrinkle Saver Button: (6) • This convenient feature lets you delay the start of the dry cycle between 3 to 24 hours. Press the "Wrinkle Saver" to choose the number of hours you want to delay the start of the cycle. • If no delay, the wrinkle saver indicator is off and remaining time indicator is on. • The LED display indicates remaining time of non-reserved program. If setting "Wrinkle Saver" in standby status, the LED display indicates 3 hr, which will increase by 1 hr with each press (until 24 and return to 3). If held for 1.5 seconds, LED display indicated value will increase continuously. 13 English More Time & Less Time Button: (7) • Set time from 0 to 180 minutes when Timed Dry or Rack Dry cycle selected. Timed-Dry Cycles Button: (8) • "Timed-Dry Cycles" button will let you select your desired dry m...

Descargar ahora

Introduzca dos números de la imagen: