Votos - 3, Puntuación media: 4 ( )

Fabricar: GE Tamaño del archivo: 285.6 kb Nombre del archivo: Idioma del manual:

Notes: Applies to Auto Dry cycle and Timed Dry cycle. • For Rack Dry cycle, remove the lint filter and assemble the drying rack with its rear end slightly downward inclined. The configuration is as shown in the following figure: Make sure lint filter is clean and then assemble it properly. If lint filter is not in place, tumbling items could enter the exhaust system and cause damage to the dryer. 15 English LOAD CLOTHES INTO DRYER • The appropriate load shall be 1/3 ~ 1/2 of the drum volume. Avoid too much load, space is needed to allow clothes free rotation for uniform and wrinkle proof drying. • When drying big articles, only 2-3 pieces shall be loaded at a time and supplemented with small and medium sized articles. • For delicate clothes or less load, two towels may be added to get better drying and wrinkle-proof effects. • Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness, electro static charges accumulation and more lint. Rack Dry cycle • This program is designed specially for articles like sport shoes. During drying please make sure the articles are placed on the rack with no risk of entangling the baffles while drum is rotating. Note: If drying rack is not in place, rolling inner tub could collide with drying rack and causes damage to the dryer and drying rack. AUTO DRY CYCLE 1.Press any button except "Off" button to power on. • Turn on the power switch, the computer board beeps once and the dryer transfers from off status to the initial operating status (Normal program). • If no "Start/Pause" button is pressed in 5 min after powering on, it automatically cuts off power and returns to off status. • It returns to off status immediately upon end of a cycle; Whatever status the computer board is (start, pause, alarm etc.). Pressing "Off" button will stop all operations and it enters off status. • Various button initial status for "Normal program". 16 English Cycle Signal Softer Wrinkle Care Off Cycles Normal LED display Indicate current program remaining time Temp High Sensor Dry Level More Dry Timed/Cycles Auto-program 2. Press "Auto-Dry Cycles" button to select a suitable full automatic cycle. • The Normal program will be automatically selected after powering on. If another full automatic program is desired, press "Auto-Dry Cycles" button until corresponding indicator turns on. Casual Delicate Touch Up Custom Normal Heavy Cotton Bulky Items Auto-Dry Cycles • To select your desired settings the "Custom" function should be chosen. • It can memorize programs defined by user and display the previous program upon next application of this function. Use details are as follows: After powering on, press "Auto-Dry Cycles" until"Custom" status, then set "Timed-Dry Cycles" to Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button or after half a minute, the program defined by user himself will be stored and will be directly displayed upon next use. Notes: Pressing "Sensor Dry Level" button will be inacti...

Descargar ahora

Introduzca dos números de la imagen: