Votos - 6, Puntuación media: 3.3 ( )

Fabricar: Samsung Tamaño del archivo: 9.91 mb Nombre del archivo: Idioma del manual:

The actual screens on your PC may be different depending upon your particular version of Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost ali cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on “Control Panel” on the Windows start menu. When the control panel window appears, click on “Appearance and Themes” and a display dialog-box will appear. When the control panel window appears, click on “Display” and a display dialog-box will appear. Navigate to the “Settings” tab on the display dialog-box. The correct size setting (resolution): Optimum- 1360 X 768 If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box. Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported) Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) iBM 64ox 480 31.469 59.940 25.175 - / - 720 x 400 31.469 70.087 28.322 - / + VESA 640 x 480 37.8б1 72.809 31.500 - / - 640 x 480 37.500 75.000 31.500 - / - 800 x 600 37.879 60.317 40.000 + /+ 800 x б00 48.077 72.188 50.000 + /+ 800 x б00 4б.875 75.000 49.500 + /+ 1024x 768 48.3б4 б0.000 65.000 - / - 1024x 768 5б.47б 70.0б9 75.000 - / - 1024x 768 б0.023 75.029 78.750 + /+ 1360x 768 47.712 60.015 85.800 + /+ ^ The interface mode is not supported. ^ The set might operate abnormally if a non-standard video format is selected. ^ DVI does not support PC function. ^ Separate and Composite modes are supported. SOG is not supported. 1. 2. 3. 4. Display Modes English-23 Setting the PC [fa] Press the PC button on the remote control to select the PC mode. Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the PC button to select PC mode. 2. Press the MENU button to display the menu. Press the ^ or ▼ button to select “Setup”, then press the ENTER® button. 3. Press the ^ or ▼ button to select “PC”, then press the ENTER® button. 4. Press the ENTER® button to select “Image Lock”. 5. Press the ^ or ▼ button to select “Coarse” or “Fine”, then press the ENTER® button. 6. Press the < or ► button to adjust the screen quality. Press the ENTER® button. 7. Press the EXIT button to exit. Changing the Image Position (Position): Adjust the PC’s screen positioning if it does not fit the TV screen. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the ^ or ▼ button to select “Position”, then press the ENTER® button. 3. Press the ^ or ▼ button to adjusting the Vertical-Position. Press the < or ► button to adjust the Horizontal-Position. Press the ENTER® button. 4. Press the EXIT button to exit. Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the ^ or ▼ button to select “Auto Adjustment”, then press the ENTER® button. 3. Press the EXIT button to exit. Initializing the Image Settings (Image Reset): You can replace all image settings with the factory default values. 1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3. 2. Press the ^ or ▼ button to select “Image Reset”, then press the ENTER® button. 3. Press the EXIT button to exit. TV P Position a ts k B ■‘•Move H1 Enter English-24 Using the Anti-Theft Kensington Lock The Kensington iock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use. 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). 2. Connect the Kensington lock cable. 3. Fix the Kensington lock to a desk or a heavy stationary object. ^ The place of the Kensington Lock may be different depending on its model. Troubleshooting: Before Contacting Service Personnel No sound or picture ♦ Check that the mains lead has been connected to a wall socket. ♦ Check that you have pressed the (*) buttons on the front of ...

Descargar ahora

Introduzca dos números de la imagen: