Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
CH LIST Channel Menu ¦ Returning Channels Antenna (Air/Cable/Satellite) Before your television can begin memorising the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air, Cable or Satellite system). Country The PIN input screen appears. Enter your 4 digit PIN number. ¦ Digital Channel: Change the country for digital channels. ¦ Analogue Channel: Change the country for analogue channels. Auto Store Scans for a channel automatically and stores in the TV. . Automatically allocated programme numbers may not correspond to actual or desired programme numbers. If a channel is locked using the ChildLock function, the PIN input window appears. ¦ Antenna Source (Air/Cable/Satellite): Select the antenna source to memorise. When Antenna Source is set to Air or Cable: ¦ Channel Source (Digital&Analogue/Digital/ Analogue): Select the channel source to memorise. When selecting Cable > Digital&Analogue or Digital: Provide a value to scan for cable channels. Search Mode (Full/Network/Quick): Scans for all channels with active broadcast stations and stores them in the TV. . If you select Quick, you can set up the Network, NetworkID,Frequency,Modulation and SymbolRate manually by press the button on the remote control. Network (Auto/Manual): Selects the Network ID setting mode among Auto or Manual. Network ID: When Network is Manual, you can set up Network ID using the numeric buttons. Frequency: Displays the frequency for the channel. (differs in each country) Modulation: Displays available modulation values. Symbol Rate: Displays available symbol rates. 14 English When Antenna Source is set to Satellite: ¦ ChannelType (All/TV/Radio): Select the Channel type to memorise. ¦ Satellite: Selects the satellite to scan. ¦ Scan Mode (All Channels/Free Channels Only): Selects the scanning mode of the selected satellite. Manual Store Scans for a channel manually and stores in the TV. . If a channel is locked using the ChildLock function, the PIN input window appears. When Antenna Source is set to Air or Cable: ¦ Digital Channel: When scanning has finished, channels are updated in the channel list. . When selecting Antenna> Air:Channel, Frequency,Bandwidth . When selecting Antenna> Cable:Frequency, Modulation,SymbolRate ¦ Analogue Channel (Programme, Colour System, Sound System, Channel, Search): If there is abnormal sound or no sound, reselect the sound standard required. . Channel mode • P (programme mode): When tuning is complete, the broadcasting stations in your area have been assigned to position numbers from P0 to P99. You can select a channel by entering the position number in this mode. • C (aerial channel mode) / S (cable channel mode): These two modes allow you to select a channel by entering the assigned number for each aerial broadcasting station or cable channel. When Antenna Source is set to Satellite: ¦ Satellite: Selects the satellite using the up/down buttons. ¦ Transponder: Selects the transponder using the up/ down buttons. ¦ Scan Mode (All Channels/Free Channels Only): Selects either free or all channels to store. ¦ Network Search (Disable/Enable): Enable / Disable network search using the up/down buttons. ¦ Signal Quality: Display the current status of broadcasting signal. . Information on a satellite and its transponder is subject to change depending on the broadcasting conditions. . When setting is completed, move to Search and press the ENTERE button. Channel scan is started. Satellite System Setup The PIN input screen appears. Enter your 4 digit PIN number. Satellite System Setup is available when Antenna is set to Satellite. Before running Auto Store, set Satellite System Setup. Then channel scan is run normally. ¦ Satellite Selection: You can choose the satellites for this TV. ¦ LNB Power (Off/On): Enables or disables the power supply for the LNB. ¦ LNB Settings: Configures the outdoor equipment. ¦ Satellite: Selects the satellite for receiving digital broadcasts. Transponder: Selects a transponder from the list or adds a new transponder. DiSEqC Mode: Selects DiSEqC mode for the selected LNB. Lower LNB Oscillators: Sets the LNB oscillators to a lower frequency. Upper LNB Oscillators: Sets the LNB oscillators to a higher frequency. Tone22kHz(Off/On/Auto): Selects the Tone 22 kHz depending on the LNB type. For a universal LNB it should be Auto. Signal Quality: Display the current status of broadcasting signal. ¦ Positioner Settings: Configures the antenna positioner. Positioner (On/Off): Enables or disables the positioned control. PositionerType (USALS/DiSEqC 1.2): Sets the positioned type between DiSEqC 1.2 and USALS(Universal Satellite Automatic Location System). – My Longitude: Sets the longitude for my location. – My Latitude: Sets the latitude for my location. – Satellite Longitude Settings: Sets the longitude of user defined satellites. User Mode: Sets the position of satellite antenna according to each satellite. If you store the current position of...
Otros modelos de este manual:TV - UE32C6000RW (20.25 mb)
TV - UE32C6005RW (20.25 mb)
TV - UE32C6200RS (20.25 mb)
TV - UE32C6510UP (20.25 mb)