Votos - 3, Puntuación media: 4.3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Press the ^ or Ў button, then press the ENTEREbutton. POWER Select the desired OSD (On Screen Display) language. Press the < or > button, then press the ENTEREbutton. P • Select the HomeUsemode. StoreDemoMode is for retail environments. • To return the unit’s settings from StoreDemoto HomeUse(standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENUfor 5 sec. Press the ^ or Ў button, then press the ENTEREbutton. Select the appropriate country. . After selecting the country in the Countrymenu, some models may proceed with an additional option to setup the pin number. . When you input the PIN number, 0-0-0-0 is not available. Press the ^ or Ў button, then press the ENTEREbutton. Select Air,Cableor Satellite. Press the ^ or Ў button, then press the ENTEREbutton. Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel> Auto Store(p. 14). . When Airor Cableis selected first: After all Airor Cablechannels are stored, the step for storing Satellite channels is displayed. . When Satelliteis selected first: After all Satellitechannels are stored, the step for storing Airor Cable channels is displayed. . Press the ENTEREbutton at any time to interrupt the memorisation process. Set the ClockModeautomatically or manually. Press the ^ or Ў button to select Auto, then press the ENTEREbutton. Press the ^ or Ў button to select the your time zone, then press the ENTEREbutton. (depending on the country) The connection method for the best HD screen quality is displayed. Press the ENTEREbutton. IfYouWant to Reset This Feature... Select Setup -Plug&Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to change the PIN number, use the Change PIN function. English 7 1 Selecting a language 2 Selecting Store Demoor Home Use 3 Selecting a country 4 Selecting an antenna 5 Selecting a channel 6 Setting the ClockMode 7 Time Zone 8 Viewing the HDConnection Guide. 9 Enjoyyour TV. 01 Getting Started Connections Connecting to an AV Device Using an HDMI or HDMI/DVI cable: HD connection (up to 1080p) Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver (STB) .HDMIIN1(DVI), 2, 3, 4, PC/DVIAUDIOIN xWhen using an HDMI/DVI cable connection, you must use the HDMIIN1(DVI)jack. For the DVI cable connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the PC/DVIAUDIOINjacks for audio. xIf an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour). xIf there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade. xIt is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur. HDMI OUTDVI OUTR-AUDIO-LAUDIO OUTWRPC INPC INDVD / Blu-ray player DVD / Blu-ray player RedWhite 8 English Using a Component (up to 1080p) or Audio/Video (480i only) Cable and Scart Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR PPPRPBYCOMPONENT OUTVIDEO OUTAUDIO OUTR-AUDIO-LAUDIO OUTR-AUDIO-LEXTRGBWRYWRYWRWRRGBRBGYWRWRVCR / DVD VCRDVD / Blu-ray player RedRedWhiteWhiteYellowRedBlueGreen . In Ext. mode, DTV Out supports MPEG SD Video and Audio only. . To obtain the best picture quality, the Component connection is recommended over the A/V connection. 02 Connections English 9 Connections Connecting to an Audio Device Using an Optical (Digital) or Audio (Analogue) Cable or Headphone Connection Available devices: digital audio system, amplifier, DVD home theatre .DIGITALAUDIOOUT(OPTICAL) xWhen a digital audio system is connected to the DIGITALAUDIOOUT(OPTICAL)jack, decrease the volume of both the TV and the system. x5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. xWhen the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. .HeadphonesH: You can connect your headphones to the headphones output on your...
Otros modelos de este manual:TV - UE32C6000RW (20.25 mb)
TV - UE32C6005RW (20.25 mb)
TV - UE32C6200RS (20.25 mb)
TV - UE32C6500UW (20.25 mb)